Abrasive paste K2 L11000
Index: K2 L11000
Polishing paste 1000g K2 LUSTER Q1, ; application: for removing scratches from colourless paints
K2 LUSTER Q1 WHITE CORK is a paste for machine polishing of paint and many other surfaces. Recommended for use in the automotive and manufacturing industries. Quickly removes very large scratches and eliminates defects from extremely damaged paints. Generates little heat during operation, thus not overheating the surface. Recommended for polishing: all types of automotive paints, industrial paints, boats, furniture, gelcoats, composite products, headlights, cellulose, furniture, synthetic surfaces, acrylics, and many others.
METHOD OF USE:
The paste is suitable for use with hard polishing sponges.
- After sanding all surface imperfections with sandpaper, proceed to polishing:
- Before starting polishing, the surface should be clean (preferably wash it with K2 KLIENT (K2 L761))
- Shake the package before application.
- Apply the paste to the polishing sponge
- Spread the paste at low speed (approx. 600 rpm), then increase to approx. 1500 rpm and polish to a high gloss.
- After polishing, clean the surface with microfiber.
To verify the condition of the paint, you can use K2 KLINET paint remover (K2 L761).
Do not allow the paste to dry on plastic parts.
Do not polish in direct sunlight.
Description
K2 LUSTER Q1 WHITE CORK is a paste for machine polishing of paint and many other surfaces. Recommended for use in the automotive and manufacturing industries. Quickly removes very large scratches and eliminates defects from extremely damaged paints. Generates little heat during operation, thus not overheating the surface. Recommended for polishing: all types of automotive paints, industrial paints, boats, furniture, gelcoats, composite products, headlights, cellulose, furniture, synthetic surfaces, acrylics, and many others.
METHOD OF USE:
The paste is suitable for use with hard polishing sponges.
- After sanding all surface imperfections with sandpaper, proceed to polishing:
- Before starting polishing, the surface should be clean (preferably wash it with K2 KLIENT (K2 L761))
- Shake the package before application.
- Apply the paste to the polishing sponge
- Spread the paste at low speed (approx. 600 rpm), then increase to approx. 1500 rpm and polish to a high gloss.
- After polishing, clean the surface with microfiber.
To verify the condition of the paint, you can use K2 KLINET paint remover (K2 L761).
Do not allow the paste to dry on plastic parts.
Do not polish in direct sunlight.
