Battery charger & jump starter STARTER 920P 6/12/24V STARTER 920P

Charger for charging and starting 6, 12 and 24 volt batteries: WET, AGM, GEL, MF, EFB, LFP. Power supply 230V, charging voltage 6/12/24 V, charging current 70 A, starting current 900 A.

Technical Parameters

PROSTARTER 920 AUTOMATIC is a professional charger for vehicle starting assistance and charging 6, 12 and 24 volt batteries:

• WET (liquid - acid)
• GEL (gel)
• MF (maintenance-free)
• AGM (with fibreglass mat)
• EFB (for vehicles with Start-Stop system)
• LFP (lithium iron phosphate)

The charger is equipped with a microprocessor control system, ensuring automatic transition to maintenance status upon reaching the required voltage on the battery and automatic resumption of charging after a voltage drop on the battery.

PROSTARTER 920 AUTOMATIC has 4 charging modes:  

• STD -  liquid acid batteries WET
• GEL – gel batteries
• AGM – maintenance-free batteries AGM, MF and EFB
• 12V-LITHIUM – lithium iron phosphate batteries (LiFePO4)

The device is equipped with a digital display, which depending on the selected mode can show: charging voltage or battery charge level (%).

REPAIR - after connecting the battery and starting the function, the charger will "check" the level of sulphation of the battery. The charger will initiate the regeneration process if it "detects" such a need

TESTER - depending on the selected testing mode, the device displays the battery voltage, charge level or alternator voltage.

SUPPLY - function supporting the battery connected in the vehicle, to mitigate additional load resulting from specific operations performed during a simple inspection/servicing of the vehicle.

Charging Process

10-step charging process ensures optimal charging conditions for the battery. The automatic control system will adjust each of the 10 charging stages for correct battery charging:

STEP 1 - Trickle charge – initially starts charging with low current, then analyses the battery and checks if it can accept charging current; prevents charging of a damaged battery

STEP 2 - Desulphation – the battery is charged with pulsed current, checking the degree of sulphation when the voltage is low

STEP 3 - Soft start – the charger gradually increases the charging current until the set charging current is reached

STEP 4 - Constant current – the battery is charged with the set current until the appropriate voltage is reached

STEP 5 - Analyse – stage analysing the battery's ability to charge

STEP 6 - Constant output charge – after reaching the required battery charge level, it switches to constant voltage charging

STEP 7 - Recovery cycle charge – stage of increased charge acceptance to compensate for reduced charging current

STEP 8 - Absorption – charging with reduced current for the appropriate voltage level

STEP 9 - Analyse – stage analysing the battery's ability to maintain charge

STEP 10 - Maintenance charge – stage maintaining the battery (float) and monitoring its condition; resumes charging with reduced current if necessary

Physical Parameters

The device is equipped with protection: thermal, against sparking on the terminal clamps, against short-circuiting of the terminals, overload and reverse polarity.

Power Parameters

Single-phase power supply 230V. The device is equipped with a power plug.

Warranty Conditions

12-month warranty for professional use. Warranty service is provided in a door-to-door system without transport costs for the user.