Battery tester load 6/12V EST-860 EST-860
Index: EST-860
Battery tester load EST-860, 6/12V, tested battery type: AGM, GEL, SLI
Tester designed for measuring lead-acid batteries with a voltage of 6V / 12V and a capacity from 30Ah to 250Ah. The tester allows for the measurement of resting voltage and voltage under load, with measurements made by the tester being similar to those during engine start-up. The device allows the battery to be loaded with a current of 200, 400A, or 600A for a measurement time of about 10 seconds.
The tester has an additional function for measuring current from 2mA to 25A, with this function you can check the current flow through all receivers in the vehicle and check which receiver draws too much current or if there is current leakage when the receivers are turned off.
BATTERY TESTER
Technical Data
0.1 A | |
Measurement of the tested battery voltage | 3.5V-20.0V |
Current measurement | 2mA - 25A |
Voltmeter resolution | 0.50% |
Load current (1 clamp on) | max 200A |
Load current (2 clamps on) | max 400A |
Load current (3 clamps on) | max 600A |
Permissible measurement time | 10 sec. |
Permissible measurement frequency |
|
- within the first minute | 3 measurements |
- in each subsequent minute | 1 measurement |
Dimensions (length/width/height) | 350x200x13 |
Weight (kg) | 3.2 |
Description
Tester designed for measuring lead-acid batteries with a voltage of 6V / 12V and a capacity from 30Ah to 250Ah. The tester allows for the measurement of resting voltage and voltage under load, with measurements made by the tester being similar to those during engine start-up. The device allows the battery to be loaded with a current of 200, 400A, or 600A for a measurement time of about 10 seconds.
The tester has an additional function for measuring current from 2mA to 25A, with this function you can check the current flow through all receivers in the vehicle and check which receiver draws too much current or if there is current leakage when the receivers are turned off.
BATTERY TESTER
Technical Data
0.1 A | |
Measurement of the tested battery voltage | 3.5V-20.0V |
Current measurement | 2mA - 25A |
Voltmeter resolution | 0.50% |
Load current (1 clamp on) | max 200A |
Load current (2 clamps on) | max 400A |
Load current (3 clamps on) | max 600A |
Permissible measurement time | 10 sec. |
Permissible measurement frequency |
|
- within the first minute | 3 measurements |
- in each subsequent minute | 1 measurement |
Dimensions (length/width/height) | 350x200x13 |
Weight (kg) | 3.2 |
Technical specification
12.0V
6.0VAGM
GEL
SLI