Battery tester digital 12V BDT4000A BDT4000A
Index: BDT4000A
Battery tester digital BDT4000A, 12V, 50-1400 EN, tested battery type: SLI; printer, charging system test, starter test
Digital tester with printer designed for WET, GEL, AGM, EFB batteries. Allows verification of the charge status of 6/12V batteries, starter status, and alternator status. Measurement voltage 6/12V.
Technical parameters
Battery and installation tester BDT4000A 6/12V with a colour LCD display and printer, designed for WET / GEL / EFB / AGM Spiral / AGM flat batteries.
Allows verification of:
- the charge status of the battery and the starting ability of 6/12V batteries used in vehicles (BATTERY TEST)
- the functioning of the vehicle's electronic system 12V (ELECTRONIC SYSTEM TEST)
Using the tester, we can select the battery standard: EN, JIS, DIN, IEC, SAE
The lowest and highest starting current (CCA) values that can be tested:
- EN: 100 - 1800 A
- IEC: 100 -1200 A
- DIN: 100 - 1200 A
- SAE: 100 - 2000 A
- JIS: 100 - 2000 A
The ambient temperature allowing proper use of the tester is within the range of -10°C to 50°C.
As a result of the BATTERY TEST, the actual starting current value is provided:
- Battery good
- Good - charge
- Charge and test
- Replace
- Damaged cell - replace
In certain cases, the device can inform us about:
- reverse polarity connection of clamps
- lack of voltage or too low battery voltage
- the need to replace the paper in the printer
Selecting the type of test is very simple, and the results do not require interpretation by the person working with the tester.
Physical parameters
The device supports 8 languages: Polish, English, Spanish, Italian, German, French, Portuguese, and Dutch.
The tester remembers several recent measurement results and allows them to be printed at any time.
Tester settings allow the company name to be entered on the printouts.
Additionally, it has built-in LED lights to illuminate the measurement area (9V battery required).
Power parameters
The tester is powered by the voltage from the tested battery.
Equipment
The device is equipped with detachable cables of 300cm length and a roll of paper for the printer.
Description
Digital tester with printer designed for WET, GEL, AGM, EFB batteries. Allows verification of the charge status of 6/12V batteries, starter status, and alternator status. Measurement voltage 6/12V.
Technical parameters
Battery and installation tester BDT4000A 6/12V with a colour LCD display and printer, designed for WET / GEL / EFB / AGM Spiral / AGM flat batteries.
Allows verification of:
- the charge status of the battery and the starting ability of 6/12V batteries used in vehicles (BATTERY TEST)
- the functioning of the vehicle's electronic system 12V (ELECTRONIC SYSTEM TEST)
Using the tester, we can select the battery standard: EN, JIS, DIN, IEC, SAE
The lowest and highest starting current (CCA) values that can be tested:
- EN: 100 - 1800 A
- IEC: 100 -1200 A
- DIN: 100 - 1200 A
- SAE: 100 - 2000 A
- JIS: 100 - 2000 A
The ambient temperature allowing proper use of the tester is within the range of -10°C to 50°C.
As a result of the BATTERY TEST, the actual starting current value is provided:
- Battery good
- Good - charge
- Charge and test
- Replace
- Damaged cell - replace
In certain cases, the device can inform us about:
- reverse polarity connection of clamps
- lack of voltage or too low battery voltage
- the need to replace the paper in the printer
Selecting the type of test is very simple, and the results do not require interpretation by the person working with the tester.
Physical parameters
The device supports 8 languages: Polish, English, Spanish, Italian, German, French, Portuguese, and Dutch.
The tester remembers several recent measurement results and allows them to be printed at any time.
Tester settings allow the company name to be entered on the printouts.
Additionally, it has built-in LED lights to illuminate the measurement area (9V battery required).
Power parameters
The tester is powered by the voltage from the tested battery.
Equipment
The device is equipped with detachable cables of 300cm length and a roll of paper for the printer.
