Putty liquid aluminium, galvanized metal, steel
Index: MF 10081
MULTI FULLER Putty liquid EXPERT GLAZE with hardener, 0,4l, intended use: aluminium, galvanized metal, steel, colour: turquoise
Expert Glaze
Finishing polyester putty with a self-levelling effect.
Variant
| Colour | Gloss level | Capacity |
|---|---|---|
| Light green | matte | 440 ml |
Top-quality, fast-drying polyester putty designed for car body repairs. It can be used as a finishing putty as well as a filling putty. Ideal for large surfaces and for quick "fast repair" paint repairs.
Advantages
- Ready for sanding in no time.
- Very easy application – self-levelling effect.
- Low specific weight.
- Very easy to sand.
- Reduced putty shrinkage by 95% compared to standard products.
- Excellent adhesion to galvanised steel and aluminium.
Substrates
The product is characterised by very good adhesion to various substrates. It can be applied to:
- Steel and aluminium after matting and degreasing.
- Sanded fibreglass (GFK/GRP), polyester putties, acrylic and epoxy primers, and old coatings in good condition.
Note: Do not apply polyester putties directly on reactive primers, 1-component acrylic products, and nitrocellulose products.
Important information regarding product use
Degrease
Mixing by weight
100 : 2
Pot life
4 ÷ 6 min. / 20°C
Curing time
16 ÷ 20 min. / 20°C
P100 ÷ P180
P180 ÷ P320
Description
Expert Glaze
Finishing polyester putty with a self-levelling effect.
Variant
| Colour | Gloss level | Capacity |
|---|---|---|
| Light green | matte | 440 ml |
Top-quality, fast-drying polyester putty designed for car body repairs. It can be used as a finishing putty as well as a filling putty. Ideal for large surfaces and for quick "fast repair" paint repairs.
Advantages
- Ready for sanding in no time.
- Very easy application – self-levelling effect.
- Low specific weight.
- Very easy to sand.
- Reduced putty shrinkage by 95% compared to standard products.
- Excellent adhesion to galvanised steel and aluminium.
Substrates
The product is characterised by very good adhesion to various substrates. It can be applied to:
- Steel and aluminium after matting and degreasing.
- Sanded fibreglass (GFK/GRP), polyester putties, acrylic and epoxy primers, and old coatings in good condition.
Note: Do not apply polyester putties directly on reactive primers, 1-component acrylic products, and nitrocellulose products.
Important information regarding product use
Degrease
Mixing by weight
100 : 2
Pot life
4 ÷ 6 min. / 20°C
Curing time
16 ÷ 20 min. / 20°C
P100 ÷ P180
P180 ÷ P320
Technical specification
aluminium
galvanized metal
steel
