Devices for working fluids and fuels LIM10200

Pneumatic brake fluid exchange device. It consists of a stainless steel tank, inside which a rubber diaphragm moves to push the fluid, a spiral tube with a handle and tap, a funnel for fluid introduction, and a pressure control gauge. The machine, which operates autonomously after pressure increase, is designed for cleaning brakes of passenger cars and trucks. Any use other than specified is considered improper and unreasonable. The manufacturer accepts no responsibility for uses other than indicated. Characteristics: Functions: Removal and replacement of fluid in most types and models of brake systems, also allows for bleeding. Working air pressure: 10 to 40 PSI: Power consumption: 4.5 cubic feet/min (CFM) at 30psi Air inlet: 1/4" - male quick connector Fluid tank capacity: 1.32 gallons (5.25 liters) Pressure regulator: Manual knob, locking Gauges: 0 ~ 140PSI, in 20PSI increments, up to 20 PSI in step, marked in 2 steps Drain tubes: 2-12-1/2 (L) x 0.316 (dia.) inch transparent polyurethane with rubber drain adapter tip Brake fluid filling hose: 10 feet, 3 inches (L) × 1/2 inch (dia.); reinforced polyurethane with ball valve quick connector on one end Overall dimensions: 11 (dia.) x 8.5 (height) x 6.5 (base dia.) inches Total height with handle: 18 inches Collection bottles: 2-9(W) × 4-3/4(D) × 2-1/4(H) inches; 0.26 gallons (one quart) Weight: 19.6 pounds Accessories: Master pump adapter set: 11 - domestic and imported vehicles, in a plastic container.