Drive-on platform 8000kg Plastic
Index: MPCR01
Drive-on platform, lifting capacity: 8000kg, width:320mm, height: 220mm, weight:9,5kg, Plastic
Ideal solution for the home workshop – reliable ramps in all conditions
MPCR01 are ramps that work daily for drivers who value independence and quick repairs in the garage. Oil changes, suspension checks, exhaust system inspections – all at a convenient height and with full stability. A set of two ramps eliminates the need to purchase additional tools – you set them up, work, and store them away. HDPE ensures that after years of intensive use, the material will not crack or lose rigidity.
Non-slip surface with special grooves – protection against sliding during work
What distinguishes MPCR01 from cheap substitutes is the specially profiled grooves across the entire surface. The wheels do not slip, the car does not "wander" sideways, and you work calmly, knowing that the vehicle will not slide off the ramp. Additionally, the high front threshold prevents the car from rolling forward uncontrollably when you are busy working under the vehicle.
HDPE material – durability and resistance to mechanical damage
The ramps are made of high-density polyethylene (HDPE) – the same material used for industrial containers and components used in extreme conditions. HDPE exhibits exceptional resistance to impacts, temperature, and oil exposure. It will not crack if you drop a tool on it, it will not soften from hot engine oil, and it will not be damaged if the vehicle rolls off too sharply. It is a material with molecular density that ensures hardness – the result? The ramps will withstand years of intensive work in the home workshop.
Tested on a 29-tonne tractor unit – durability guarantee
MAPOWER does not settle for promises – it tests products in extreme conditions. The MPCR01 ramps were driven over by a MAN TGX tractor unit (8 t) with a WIELTON 40' trailer (6 t) and a 15-ton load, resulting in a total of 29 tons of load. The result? The ramps did not budge, crack, or deform by even a millimetre. The declared load capacity is 8 tons per pair, but the actual test shows a much greater safety margin. This means that any passenger car or small van can drive on without the slightest risk.
Set ready to work
A set of two ramps eliminates the need for additional tools – you drive the entire front on and have access to the entire undercarriage. You can change the oil, check the filters, inspect the suspension or exhaust system without moving the vehicle or needing a visit to the mechanic. This means real savings on services.
Safety and proper use – a few important rules
The ramps must be placed on a level, stable surface – cement or asphalt, not gravel or a mound. The entry should be slow and careful, without momentum – this ensures that the wheels will sit precisely, and the car will stand securely. Before each use, check that the rubber pads are not stuck or damaged. After the season, store in a dry place – HDPE is not afraid of frost, but if left in the sun during the summer, the rate of degradation accelerates.
Description
Ideal solution for the home workshop – reliable ramps in all conditions
MPCR01 are ramps that work daily for drivers who value independence and quick repairs in the garage. Oil changes, suspension checks, exhaust system inspections – all at a convenient height and with full stability. A set of two ramps eliminates the need to purchase additional tools – you set them up, work, and store them away. HDPE ensures that after years of intensive use, the material will not crack or lose rigidity.
Non-slip surface with special grooves – protection against sliding during work
What distinguishes MPCR01 from cheap substitutes is the specially profiled grooves across the entire surface. The wheels do not slip, the car does not "wander" sideways, and you work calmly, knowing that the vehicle will not slide off the ramp. Additionally, the high front threshold prevents the car from rolling forward uncontrollably when you are busy working under the vehicle.
HDPE material – durability and resistance to mechanical damage
The ramps are made of high-density polyethylene (HDPE) – the same material used for industrial containers and components used in extreme conditions. HDPE exhibits exceptional resistance to impacts, temperature, and oil exposure. It will not crack if you drop a tool on it, it will not soften from hot engine oil, and it will not be damaged if the vehicle rolls off too sharply. It is a material with molecular density that ensures hardness – the result? The ramps will withstand years of intensive work in the home workshop.
Tested on a 29-tonne tractor unit – durability guarantee
MAPOWER does not settle for promises – it tests products in extreme conditions. The MPCR01 ramps were driven over by a MAN TGX tractor unit (8 t) with a WIELTON 40' trailer (6 t) and a 15-ton load, resulting in a total of 29 tons of load. The result? The ramps did not budge, crack, or deform by even a millimetre. The declared load capacity is 8 tons per pair, but the actual test shows a much greater safety margin. This means that any passenger car or small van can drive on without the slightest risk.
Set ready to work
A set of two ramps eliminates the need for additional tools – you drive the entire front on and have access to the entire undercarriage. You can change the oil, check the filters, inspect the suspension or exhaust system without moving the vehicle or needing a visit to the mechanic. This means real savings on services.
Safety and proper use – a few important rules
The ramps must be placed on a level, stable surface – cement or asphalt, not gravel or a mound. The entry should be slow and careful, without momentum – this ensures that the wheels will sit precisely, and the car will stand securely. Before each use, check that the rubber pads are not stuck or damaged. After the season, store in a dry place – HDPE is not afraid of frost, but if left in the sun during the summer, the rate of degradation accelerates.