Electrode welder MMA / TIG DC / TIG LIFT 180A TECNICA 211/S +ACX

 

Inverter welding rectifier for MMA welding with a coated electrode using direct current (DC) and TIG welding using direct current (DC) with contact arc ignition. Power supply 230V, welding current 15-180 A.

 

Characteristics:

 

• Inverter welding rectifier for MMA welding with a coated electrode using direct current (DC) and TIG welding using direct current (DC) with contact arc ignition.
• Single-phase power supply.
• Allows welding with rutile, basic, stainless steel, and cast iron electrodes.
• Overload protection.
• Electronically controlled smooth adjustment of welding current.
• Features that facilitate the WELDING process:
  • ANTI STICK: anti-short circuit - automatically switches off the welding voltage if the electrode sticks to the welded MATERIAL, making it easier to detach and preventing accidental arc formation
  • ARC FORCE: short circuit current adjustment - facilitates the transfer of the molten electrode drop to the welded material, preventing arc extinction when the electrode drop contacts the weld pool
  • HOT START: hot start - facilitates electrode ignition by providing a higher welding current at each arc ignition.
• Maximum diameter of coated electrode 4.0.
• Fan-cooled.
• Over and under voltage protection.
• High stability of welding current despite fluctuations in the supply voltage.
• Price of the device with accessories: case, 1.8m welding cable, 1.8m ground cable.

 

PHYSICAL PARAMETERS
Protection degree	IP 23
Device / set weight	4.1 / 6.9 kg
Overall dimensions L x W x H	300x130x230 mm
TECHNICAL PARAMETERS
Power (60% / max)	2.9 / 5.3 kW
Open circuit voltage	75 V
Maximum current	170 - 18%
Current at 60% duty cycle	105 A
Welding electrode diameter	1.6 - 4.0
Welding current adjustment range	15 - 180 A
POWER SUPPLY PARAMETERS
Minimum power of generator	7 kW
Current drawn from the network (60% / max)	19 / 34 A
Power supply network protection	16 A
Rated supply voltage	230 V; 50Hz (1ph)