Diagnostic tester KTS 590 without software
Index: 0 684 400 590
Diagnostic tester, BOSCH, KTS 590 CAR interface for PC, software type: without software
KTS 590
Module for control unit diagnostics with extended measurement technology (2-channel oscilloscope, 2-channel multimeter)
Diagnostic modules KTS 590 are based on the application Bosch ESI[tronic] 2.0. It provides support for vehicles based on Ethernet network (DoIP – Diagnostics over Internet Protocol), with features significantly improving workshop efficiency. With access to modern measurement technology, services can efficiently test and measure all signals from sensors and actuators in vehicles.
The module is adapted to current and future solutions. Additionally, it is possible to simultaneously handle multiple interfaces and thus utilize vehicle manufacturers' portals for diagnostics and reprogramming according to Euro 5/6.
Features and benefits of KTS 590
- Built-in 2-channel oscilloscope, for quick viewing of electrical signal waveforms
- Compatible with Bosch Easy Connect and other Bosch adapters for vehicles: easily expand diagnostic capabilities with available cables for other brands beyond OBD cables
- Ethernet interface (DoIP – Diagnostics over Internet Protocol): prepare today to meet tomorrow's requirements. Supports current and future vehicle interfaces based on the Ethernet network
- Controller reprogramming capability according to Euro 5 / Euro 6 / PassThru standard and access to technical repair information: to obtain a wide range of guidelines related to specific vehicle models
- Strong and stable Bluetooth connectivity with a range of 100 m: work with maximum efficiency and gain greater range throughout the entire workshop
- Works with any Windows computer and uses installed and licensed ESI[tronic] 2.0 Online: control diagnostics and repairs in a truly versatile way that is suitable for workshop configuration
- Optimally designed for use with ESI[tronic] 2.0 Online software (purchased separately): benefit not only from diagnostics but also from intelligent fault location and support for quick repairs and inspections
Technical data
| KTS 590 | 2-channel multimeter, 2-channel oscilloscope |
|---|---|
| Operating voltage | 8V DC-28V DC |
| Power consumption from vehicle battery or power supply | < 10 W |
| Connection to PC | USB 2.0, Bluetooth® class 1 |
| Weight | approx. 0.5 kg |
| Dust and water protection | IP53 |
| Multimeter sampling frequency | 100 kHz |
| Supported protocols | ISO 15031, ISO 22900, SAE J2534-1 and -2 (PassThru), ISO 9141-2 (K and L), SAE J1850 VPW and PWM, CAN High Speed ISO 11898, ISO 15765-4 (OBD), CAN Single Wire, CAN Low Speed, ISO 13400 (Diagnostics over IP), and other special protocols |
| Dimensions | 125 x 44 x 180 mm (D x W x H) |
| Operating temperature | 5 °C – 40 °C |
Scope of delivery
- OBD cable (1.5 m)
- Power supply
- Set of measuring cables / tips
- Measuring cable (red/black) only KTS 590
- Black connection clamp
- Red blade tip
- USB cable (3m)
- Mounting kit
- Set of parts for trolley mounting
- USB Bluetooth® adapter
- User manual
- Storage case
Description
KTS 590
Module for control unit diagnostics with extended measurement technology (2-channel oscilloscope, 2-channel multimeter)
Diagnostic modules KTS 590 are based on the application Bosch ESI[tronic] 2.0. It provides support for vehicles based on Ethernet network (DoIP – Diagnostics over Internet Protocol), with features significantly improving workshop efficiency. With access to modern measurement technology, services can efficiently test and measure all signals from sensors and actuators in vehicles.
The module is adapted to current and future solutions. Additionally, it is possible to simultaneously handle multiple interfaces and thus utilize vehicle manufacturers' portals for diagnostics and reprogramming according to Euro 5/6.
Features and benefits of KTS 590
- Built-in 2-channel oscilloscope, for quick viewing of electrical signal waveforms
- Compatible with Bosch Easy Connect and other Bosch adapters for vehicles: easily expand diagnostic capabilities with available cables for other brands beyond OBD cables
- Ethernet interface (DoIP – Diagnostics over Internet Protocol): prepare today to meet tomorrow's requirements. Supports current and future vehicle interfaces based on the Ethernet network
- Controller reprogramming capability according to Euro 5 / Euro 6 / PassThru standard and access to technical repair information: to obtain a wide range of guidelines related to specific vehicle models
- Strong and stable Bluetooth connectivity with a range of 100 m: work with maximum efficiency and gain greater range throughout the entire workshop
- Works with any Windows computer and uses installed and licensed ESI[tronic] 2.0 Online: control diagnostics and repairs in a truly versatile way that is suitable for workshop configuration
- Optimally designed for use with ESI[tronic] 2.0 Online software (purchased separately): benefit not only from diagnostics but also from intelligent fault location and support for quick repairs and inspections
Technical data
| KTS 590 | 2-channel multimeter, 2-channel oscilloscope |
|---|---|
| Operating voltage | 8V DC-28V DC |
| Power consumption from vehicle battery or power supply | < 10 W |
| Connection to PC | USB 2.0, Bluetooth® class 1 |
| Weight | approx. 0.5 kg |
| Dust and water protection | IP53 |
| Multimeter sampling frequency | 100 kHz |
| Supported protocols | ISO 15031, ISO 22900, SAE J2534-1 and -2 (PassThru), ISO 9141-2 (K and L), SAE J1850 VPW and PWM, CAN High Speed ISO 11898, ISO 15765-4 (OBD), CAN Single Wire, CAN Low Speed, ISO 13400 (Diagnostics over IP), and other special protocols |
| Dimensions | 125 x 44 x 180 mm (D x W x H) |
| Operating temperature | 5 °C – 40 °C |
Scope of delivery
- OBD cable (1.5 m)
- Power supply
- Set of measuring cables / tips
- Measuring cable (red/black) only KTS 590
- Black connection clamp
- Red blade tip
- USB cable (3m)
- Mounting kit
- Set of parts for trolley mounting
- USB Bluetooth® adapter
- User manual
- Storage case