Diagnostic tester NAVIGATOR NANOS 2
Index: TEX D08615 MKT
Diagnostic tester, TEXA, NAVIGATOR NANOS 2 CAR interface for PC IDC6 / LIGHT
NAVIGATOR NANO S 2 CAR LIGHT
NAVIGATOR NANO S 2
NAVIGATOR NANO S 2 is a TEXA diagnostic interface dedicated to diagnostics in the CAR environment. It features a durable and ergonomic design.
NAVIGATOR NANO S 2 has been designed and manufactured with the utmost care to meet the demands of a modern workshop. It is an innovative interface equipped with advanced technological solutions. Noteworthy is the use of a latest generation processor and 8 GB memory, as well as modern connectivity, including a Bluetooth 5.0 module.
Additionally, NAVIGATOR NANO S 2 is compatible with CAN FD communication protocols, allowing simultaneous management of three channels, and DoIP.
TECHNICAL SPECIFICATION
- Processor: CORTEX M7 550 MHz, 1MB FLASH, 564KB RAM
- SRAM: 16 MB
- eMMC: 8 GB on 8-bit bus
- Flash Memory (NOR): 16 Mbit
- Internal Battery: Lithium polymer, 3.7 V 130 mA/h
- Nominal Supply Voltage: OBD: 12 V *
- Wireless Communication: Bluetooth 5.0 class 1
- Operating Frequency Band: 2402 … 2480 MHz
- Maximum Transmitted Radio Frequency Power: 10 dBm
- Wired Connection:
- Virtual COM Via USB Full Speed
- USB C: 5 V *
- Electronic Multiplexer: bidirectional, 13-channel
- Diagnostic Connector: OBD
- Supported Protocols:
- Blink Codes
- K, L (with current protection 60 mA) ISO9141-2, ISO14230
- CAN_FD 11898-2:2016 3 channels
- CAN ISO 11898-3
- CAN SAE J2411 Single Wire
- SAE J1850 PWM and VPW
- Ethernet DoIP ISO13400-3
- Power Connector: OBD
- Signalling:
- LED RGB x4
- Buzzer – sound indicator
- Current Consumption: DC 12 V, 250 mA
- Operating Temperature: 0 °C - 40 °C
- Storage Temperature: -20 °C - 60 °C
- Battery Charging Temperature: 0 °C - 45 °C
- Weight: 72 g
- Environmental Conditions:
- Application: indoor and outdoor
- Altitude: < 2000 m
- Supply Voltage Fluctuations: ±10%
- Overvoltage Category: II
- Pollution Degree: 2
- Maximum Relative Humidity: 80% for temperatures up to 31°C, decreasing linearly to 50% at 40°C
- Directives:
- RED 2014/53/EU
- RoHS 2011/65/EU and Delegated Directive 2015/863/EU
- Legal Regulations:
- Radio Equipment Regulation 2017 No. 1206
- RoHS Regulation 2012 No. 3032
- Electromagnetic Compatibility:
- ETSI EN 301 489-1
- ETSI EN 301 489-17
- Radio Systems: ETSI EN 300 328
- Electrical Safety:
- EN 62368-1
- EN 62368-3
- EN 62311
- Warranty: 2 years
- SCOPE OF DELIVERY: device, USB cable, manual, CE declaration
IDC6 CAR LIGHT
Lifetime license for CAR software, includes standard access to:
- Commercial vehicles
- Passenger cars
Allows for diagnostics (reading errors, parameters), component activations, component tests, performing adaptations, adjustments, calibration of many developed and installed electronic modules in vehicles, and calibration of ADAS systems.
Functionalities grouped in quick access menu:
- Vehicle overview
- Adjustments and coding
- Device checking
- Automatic vehicle search by VIN
Commonly used for functionalities such as:
- error clearing,
- particulate filter regeneration,
- injector coding,
- gearbox adaptations,
- service interval resetting,
- TPMS sensor learning,
- calibration and diagnostics of ADAS systems.
No software updates included in the license price – updates possible after purchasing a TEXPACK subscription. The LIGHT version software does NOT have access to the technical database and HAYNES PRO guided diagnostics. CALL CENTER technical support is free only with an active TEXPACK CAR
Description
NAVIGATOR NANO S 2 CAR LIGHT
NAVIGATOR NANO S 2
NAVIGATOR NANO S 2 is a TEXA diagnostic interface dedicated to diagnostics in the CAR environment. It features a durable and ergonomic design.
NAVIGATOR NANO S 2 has been designed and manufactured with the utmost care to meet the demands of a modern workshop. It is an innovative interface equipped with advanced technological solutions. Noteworthy is the use of a latest generation processor and 8 GB memory, as well as modern connectivity, including a Bluetooth 5.0 module.
Additionally, NAVIGATOR NANO S 2 is compatible with CAN FD communication protocols, allowing simultaneous management of three channels, and DoIP.
TECHNICAL SPECIFICATION
- Processor: CORTEX M7 550 MHz, 1MB FLASH, 564KB RAM
- SRAM: 16 MB
- eMMC: 8 GB on 8-bit bus
- Flash Memory (NOR): 16 Mbit
- Internal Battery: Lithium polymer, 3.7 V 130 mA/h
- Nominal Supply Voltage: OBD: 12 V *
- Wireless Communication: Bluetooth 5.0 class 1
- Operating Frequency Band: 2402 … 2480 MHz
- Maximum Transmitted Radio Frequency Power: 10 dBm
- Wired Connection:
- Virtual COM Via USB Full Speed
- USB C: 5 V *
- Electronic Multiplexer: bidirectional, 13-channel
- Diagnostic Connector: OBD
- Supported Protocols:
- Blink Codes
- K, L (with current protection 60 mA) ISO9141-2, ISO14230
- CAN_FD 11898-2:2016 3 channels
- CAN ISO 11898-3
- CAN SAE J2411 Single Wire
- SAE J1850 PWM and VPW
- Ethernet DoIP ISO13400-3
- Power Connector: OBD
- Signalling:
- LED RGB x4
- Buzzer – sound indicator
- Current Consumption: DC 12 V, 250 mA
- Operating Temperature: 0 °C - 40 °C
- Storage Temperature: -20 °C - 60 °C
- Battery Charging Temperature: 0 °C - 45 °C
- Weight: 72 g
- Environmental Conditions:
- Application: indoor and outdoor
- Altitude: < 2000 m
- Supply Voltage Fluctuations: ±10%
- Overvoltage Category: II
- Pollution Degree: 2
- Maximum Relative Humidity: 80% for temperatures up to 31°C, decreasing linearly to 50% at 40°C
- Directives:
- RED 2014/53/EU
- RoHS 2011/65/EU and Delegated Directive 2015/863/EU
- Legal Regulations:
- Radio Equipment Regulation 2017 No. 1206
- RoHS Regulation 2012 No. 3032
- Electromagnetic Compatibility:
- ETSI EN 301 489-1
- ETSI EN 301 489-17
- Radio Systems: ETSI EN 300 328
- Electrical Safety:
- EN 62368-1
- EN 62368-3
- EN 62311
- Warranty: 2 years
- SCOPE OF DELIVERY: device, USB cable, manual, CE declaration
IDC6 CAR LIGHT
Lifetime license for CAR software, includes standard access to:
- Commercial vehicles
- Passenger cars
Allows for diagnostics (reading errors, parameters), component activations, component tests, performing adaptations, adjustments, calibration of many developed and installed electronic modules in vehicles, and calibration of ADAS systems.
Functionalities grouped in quick access menu:
- Vehicle overview
- Adjustments and coding
- Device checking
- Automatic vehicle search by VIN
Commonly used for functionalities such as:
- error clearing,
- particulate filter regeneration,
- injector coding,
- gearbox adaptations,
- service interval resetting,
- TPMS sensor learning,
- calibration and diagnostics of ADAS systems.
No software updates included in the license price – updates possible after purchasing a TEXPACK subscription. The LIGHT version software does NOT have access to the technical database and HAYNES PRO guided diagnostics. CALL CENTER technical support is free only with an active TEXPACK CAR
Technical specification
IDC6
LIGHT