Index: 0 684 400 560/BF
Diagnostic tester, BOSCH, KTS 560 CAR interface for PC
Bosch KTS 560 Fault Tester
Module for controller diagnostics in all current and future vehicles, equipped with a multimeter. Advanced, fully PassThru compliant module interface allows easy reprogramming of factory software and parallel diagnostics.
Advantages
- Built-in 1-channel multimeter: a quick and convenient way to troubleshoot voltage, current, and resistance issues.
- Ethernet Interface (DoIP - Diagnostics over Internet Protocol): prepare today to meet tomorrow's requirements. Supports current and future vehicle interfaces based on Ethernet network.
- Strong and stable Bluetooth connectivity with a range of 100 m: work with maximum efficiency and gain greater range throughout the entire workshop.
- Compatible with Bosch Easy Connect and other Bosch adapters: easily extend diagnostic capabilities with available cables for other brands beyond OBD wires.
- System operation/communication phase status indication by LED lights
Main product features:
- Ability to reprogram the controller according to Euro 5 / Euro 6 / PassThru standard and access to technical repair information, offering guidance for specific vehicle models.
- Optimally designed for use with ESI[tronic] 2.0 software: provides intelligent fault location, support for quick repairs and inspections.
- Works with any Windows computer: uses installed and licensed ESI[tronic] Evolution, enabling comprehensive diagnostics and repairs.
KTS 560 - a way to increase diagnostic work efficiency in a professional workshop.
Technical Specification
| Parameter | Specification |
|---|---|
| KTS 560 | 1-channel multimeter |
| Operating voltage | 8V DC-28V DC |
| Power consumption | Via vehicle battery or power supply < 10 W |
| PC connection | USB 2.0, Bluetooth® class 1 |
| Weight | approx. 0.5 kg |
| Dust and water protection | IP53 |
| Multimeter sampling frequency | 100 kHz |
| Supported protocols | ISO 15031, ISO 22900, SAE J2534-1 and -2 (PassThru), ISO 9141-2 (K and L), SAE J1850 VPW and PWM, CAN High Speed ISO 11898, ISO 15765-4 (OBD), CAN Single Wire, CAN Low Speed, ISO 13400 (Diagnostics over IP), and other special protocols |
| Dimensions | 125 x 44 x 180 mm (D x W x H) |
| Operating temperature | 5 °C – 40 °C |
Description
Bosch KTS 560 Fault Tester
Module for controller diagnostics in all current and future vehicles, equipped with a multimeter. Advanced, fully PassThru compliant module interface allows easy reprogramming of factory software and parallel diagnostics.
Advantages
- Built-in 1-channel multimeter: a quick and convenient way to troubleshoot voltage, current, and resistance issues.
- Ethernet Interface (DoIP - Diagnostics over Internet Protocol): prepare today to meet tomorrow's requirements. Supports current and future vehicle interfaces based on Ethernet network.
- Strong and stable Bluetooth connectivity with a range of 100 m: work with maximum efficiency and gain greater range throughout the entire workshop.
- Compatible with Bosch Easy Connect and other Bosch adapters: easily extend diagnostic capabilities with available cables for other brands beyond OBD wires.
- System operation/communication phase status indication by LED lights
Main product features:
- Ability to reprogram the controller according to Euro 5 / Euro 6 / PassThru standard and access to technical repair information, offering guidance for specific vehicle models.
- Optimally designed for use with ESI[tronic] 2.0 software: provides intelligent fault location, support for quick repairs and inspections.
- Works with any Windows computer: uses installed and licensed ESI[tronic] Evolution, enabling comprehensive diagnostics and repairs.
KTS 560 - a way to increase diagnostic work efficiency in a professional workshop.
Technical Specification
| Parameter | Specification |
|---|---|
| KTS 560 | 1-channel multimeter |
| Operating voltage | 8V DC-28V DC |
| Power consumption | Via vehicle battery or power supply < 10 W |
| PC connection | USB 2.0, Bluetooth® class 1 |
| Weight | approx. 0.5 kg |
| Dust and water protection | IP53 |
| Multimeter sampling frequency | 100 kHz |
| Supported protocols | ISO 15031, ISO 22900, SAE J2534-1 and -2 (PassThru), ISO 9141-2 (K and L), SAE J1850 VPW and PWM, CAN High Speed ISO 11898, ISO 15765-4 (OBD), CAN Single Wire, CAN Low Speed, ISO 13400 (Diagnostics over IP), and other special protocols |
| Dimensions | 125 x 44 x 180 mm (D x W x H) |
| Operating temperature | 5 °C – 40 °C |
Technical specification
Name
Diagnostic tester
Set
No
Diagnostic environment
CAR
Model
KTS 560
Device type
interface for PC
Touch screen
No
Built-in multimetre
Yes
Built-in oscilloscope
Lack
Wireless diagnostic
Yes