Diagnostic tester NAVIGATOR TXB EVOLUTION

NAVIGATOR TXB Evolution

Evolution in diagnostics of MOTORCYCLES and WATERCRAFT

 

THERE WAS LITTLE TO IMPROVE BUT WE DID IT.

NAVIGATOR TXB Evolution is a new TEXA tool designed to meet the specific diagnostic needs of the BIKE and MARINE environments.

 

Its hardware characteristics allow it to handle all protocols currently used in both environments, and the built-in 16-pin CPC connector allows the use of all diagnostic cables. The highly efficient interface is equipped with 16 MBit SRAM memory and 8 GBit NAND Flash cache, which is of great importance as it allows the mechanic to conveniently upload injection map files.

 

Supported CAN standards have been expanded to include the ability to manage single wire CAN and CAN controller, which allows simultaneous diagnostic testing on multiple networks.

 

PARAMETER RECORDING DURING ROAD TESTS

NAVIGATOR TXB Evolution allows for diagnostic sessions in "Road Test" mode, while the vehicle is in motion, to identify specific faults that cannot be detected in workshop conditions. The interface records the situation that occurred on the road, providing not only fault codes but also the conditions in which they were recorded.

 

This allows the mechanic to obtain a range of additional information to facilitate the identification of the actual fault, thus enabling effective vehicle repair upon returning to the workshop.

 

Inseparable pair

IDC5 is TEXA's unique diagnostic software for managing all operations performed daily in the workshop.

 

Adapted to the specific BIKE and MARINE environments, where TEXA is a leader, it enables all operations required by mechanics in this sector, including reading and clearing errors, reading parameters and states of control units, activation, adjustment and configuration of controllers present in the vehicle, clearing indicators, ECU configuration, CO adjustment and injection timing, key configuration.

 

Thanks to the global network established over more than 20 years on the market, IDC5 is able to provide excellent coverage of brands and models of vehicles on the road.

 

Always full diagnostic range

IDC5 includes a range of very advanced and practical functions, such as Global Scan for detecting control units installed in the vehicle and checking for errors stored in them, or freeze frame which displays a set of parameters and data relevant to the vehicle's usage conditions at the time the fault occurred.

 

Attention to detail has also led to the development and implementation of special functions that meet the needs of this unique environment. Among them, we can mention handlebar configuration for the MARINE environment or the CIP function for BIKE.

 

 

 

Technical Data

 

Processor: CORTEX M3 STM32F103ZG 72 MHz, FLASH 1024 Kbytes, SRAM 96 Kbytes

SRAM Memory: 16 Mbits - 1024K x 16 bits

NAND flash memory: 8 Gbits on 8-bit bus

Vehicle battery: System management 12VDC and 24VDC

External power supply: 8 ÷ 32 V

USB connectivity: virtual RS232 via USB 2.0 device

Wireless connection: Bluetooth class 1 (30 m)

 

ELECTRONIC MULTIPLEXER

Diagnostic connector: 16-pin CPC