Induction heater INDUCTOR TWIN POWER

 

INDUCTOR TWIN POWER  is a revolutionary induction heater used for rapid flameless heating of ferrous metals and aluminium using the induction method.

Utilising the principles of electromagnetic induction, it can deliver a huge amount of heat to a specific spot in just a few seconds to a depth of 6mm. It heats metal to 'red' (temperature approx. 1000˚C) over an area of 10x40mm and thickness of 6mm in 1 second. By heating only the selected spot, it does not damage glass, rubber, plastic components, or painted surfaces in the immediate vicinity of the heater's operation.

Recommended for servicing heavy vehicles for mechanical and post-accident repairs and trailer repairs.

It guarantees reduced repair time and maximum heating control during operation. Unlike a gas torch, the induction heater heats metal only in the selected spot to a temperature of 500-600˚C without altering the technical characteristics of the steel.

Power adjustable in 10% increments.

 

Recommended for:

 

• straightening shafts
• straightening structural beams
• suspension repairs
• straightening and bending springs
• straightening frames even in heavy vehicles
• work on brake lines
• unscrewing bolts
• dismantling exhaust systems
• dismantling lambda sensors
• dismantling knuckles, beams, and other suspension work
• dismantling shock absorbers
• unscrewing hub bolts and studs
• unlocking rusted elements
• removing old paint and lacquer residues
• hardening steel

 

 

Current drawn from the network 46A Rated supply voltage 3x400V; 50Hz/60Hz (3ph) Length of complete cable 4 m Tank capacity 25 litres Cooling type liquid Protection class IP21 Overall dimensions L x W x H 101x64x95cm Continuous operation time over 30 minutes at maximum power Frequency 15-50 kHz automatically adjustable Maximum power 2x18 kW Heating power (temperature approx. 1000˚C) 10x40x6mm in 1 second (for each tip) Adjustment levels 10, independent for each tip