Induction heater 8,5 kW INDUCTOR DRAGON
Index: DRAGON 600 IHD06
Induction heater INDUCTOR DRAGON, voltage: 3x400V, 6,2 kW / 8,5 kW, type of cooling: liquid coolant
INDUCTOR 840 IHD600 is a revolutionary induction heater used for the rapid flameless heating of ferrous metals and aluminium using the induction method.
Utilising the principles of electromagnetic induction, it can deliver a huge amount of heat to a specific spot in just a few seconds to a depth of 5mm. It heats metal to 'red' (temperature approx. 1000˚C) in an area of 8x13mm and thickness of 5mm in 1 second. By heating only the selected spot, it does not damage glass, rubber, plastic components, or painted surfaces in the immediate vicinity of the heater's operation.
Recommended for every passenger and commercial vehicle service for bodywork and mechanical repairs. For use in repairs and wheel alignment settings, at tyre replacement points and mechanical workshops. It facilitates the disassembly of blocked screws, nuts, pins, bearings, and other car parts.
Guarantees reduced repair time and maximum heating control during operation. Unlike a gas torch, the induction heater heats metal only in the selected spot to a temperature of 500-600˚C without changing the technical characteristics of the steel.
Power adjustable in 10% increments
SPECIFICATION:
Current drawn from the network 11A
Power supply network protection 16A slow-blow
Rated supply voltage 3x400V; 50Hz/60Hz (3ph)
Length of complete cable 3 m
Tank capacity 20 litres
Type of cooling liquid
Protection degree IP 21
Overall dimensions L x W x H 43x42x104 cm
Continuous operation time over 30 minutes at maximum power
Frequency 15-50 kHz automatically adjustable
Continuous power 6.2 kW
Maximum power 8.5 kW
Heating power (temperature approx. 1000˚C) 8x13x5mm in 1 second
Adjustment levels 10
Description
INDUCTOR 840 IHD600 is a revolutionary induction heater used for the rapid flameless heating of ferrous metals and aluminium using the induction method.
Utilising the principles of electromagnetic induction, it can deliver a huge amount of heat to a specific spot in just a few seconds to a depth of 5mm. It heats metal to 'red' (temperature approx. 1000˚C) in an area of 8x13mm and thickness of 5mm in 1 second. By heating only the selected spot, it does not damage glass, rubber, plastic components, or painted surfaces in the immediate vicinity of the heater's operation.
Recommended for every passenger and commercial vehicle service for bodywork and mechanical repairs. For use in repairs and wheel alignment settings, at tyre replacement points and mechanical workshops. It facilitates the disassembly of blocked screws, nuts, pins, bearings, and other car parts.
Guarantees reduced repair time and maximum heating control during operation. Unlike a gas torch, the induction heater heats metal only in the selected spot to a temperature of 500-600˚C without changing the technical characteristics of the steel.
Power adjustable in 10% increments
SPECIFICATION:
Current drawn from the network 11A
Power supply network protection 16A slow-blow
Rated supply voltage 3x400V; 50Hz/60Hz (3ph)
Length of complete cable 3 m
Tank capacity 20 litres
Type of cooling liquid
Protection degree IP 21
Overall dimensions L x W x H 43x42x104 cm
Continuous operation time over 30 minutes at maximum power
Frequency 15-50 kHz automatically adjustable
Continuous power 6.2 kW
Maximum power 8.5 kW
Heating power (temperature approx. 1000˚C) 8x13x5mm in 1 second
Adjustment levels 10