Paint structural black can 0,8l
Index: MF 6961
Paint Bumper Paint (0,8 l) black, structural, for bumpers
Bumper Paint
Bumper Paint
Variant
| Colour | Gloss level | Capacity |
|---|---|---|
| Black | Matt | 0.8L |
High-quality 1K thermoplastic topcoat paint with a special structural effect. Recommended for finishing plastic car panels, such as bumpers, trims, and mirror housings. It allows for a fine-grained structure imitating plastic, covering minor surface defects.
Advantages
- exceptionally short curing time
- very good coverage
- high scratch resistance
- very good adhesion to plastic primers
Substrates
Product intended for coating plastics, especially polypropylene, PP, and its blends. It is recommended to bake plastic panels at a temperature of 50 degrees, which facilitates the removal of silicone from the surface.
Degrease
Mixing ratio
1 + 50 ÷ 60%
Spray viscosity
17 ÷ 18s / 20°C
1-2 layers
HVLP / RP
ø1.3 ÷ 1.4 mm
Between layers:
approximately 5-10 minutes
Curing time
20 min. / 20°C
Dry sanding
P360 ÷ P500
Wet sanding
P600 ÷ P1000
Description
Bumper Paint
Bumper Paint
Variant
| Colour | Gloss level | Capacity |
|---|---|---|
| Black | Matt | 0.8L |
High-quality 1K thermoplastic topcoat paint with a special structural effect. Recommended for finishing plastic car panels, such as bumpers, trims, and mirror housings. It allows for a fine-grained structure imitating plastic, covering minor surface defects.
Advantages
- exceptionally short curing time
- very good coverage
- high scratch resistance
- very good adhesion to plastic primers
Substrates
Product intended for coating plastics, especially polypropylene, PP, and its blends. It is recommended to bake plastic panels at a temperature of 50 degrees, which facilitates the removal of silicone from the surface.
Degrease
Mixing ratio
1 + 50 ÷ 60%
Spray viscosity
17 ÷ 18s / 20°C
1-2 layers
HVLP / RP
ø1.3 ÷ 1.4 mm
Between layers:
approximately 5-10 minutes
Curing time
20 min. / 20°C
Dry sanding
P360 ÷ P500
