Engine oil additive for crankcase / for vehicle engines, petrol MA 20-B40
Index: MA 20-B40
Engine oil additive 0,5 l Power Tec for crankcase / for vehicle engines (Petrol), removes: coal deposit, oil deposits, sludge, application - advantages: improves engine work; revitalization, Box
Professional engine oil system flushing agent for internal combustion engines based on high-performance solvents, detergents, and lubricants. Thanks to its special formulation, the agent effectively dissolves hard carbon deposits, sludge, and other difficult-to-remove contaminants found in the engine's lubrication system. It prepares the oil system for new oil. In case of compression problems resulting from seized and blocked piston rings, the agent (after removing the spark plugs) can be applied directly to the combustion chamber and left for a few hours to penetrate and dissolve the deposits. As a result of releasing the seized rings, the engine will increase compression in the cylinders and significantly improve its dynamics and power. The product restores full flow capacity to the oil channels. It significantly reduces oil consumption and exhaust smoke, reducing harmful emissions. The agent is used for all types of internal combustion engines. A 500ml package is sufficient to flush an engine with an oil system capacity of 6 litres. In the case of a smaller system, the entire contents of the can can be poured without concern. The agent should be used preventively with each oil change in the engine and remedially in case of excessive oil burning or compression problems. The operation is completely safe for the engine.
When should you use an engine flush?
Preventively with each oil change
If the car is mainly driven in urban cycles
After purchasing a used car with an unknown service history
If there are long intervals between oil changes
Remedially when the following symptoms occur
When the engine burns oil in quantities exceeding factory specifications
Dark or blue smoke is coming from the exhaust system
Compression in individual cylinders is weak or there are significant differences
Valve lifters are audible
There is a noticeable drop in engine power
There is a drop or increase in oil pressure at idle
Potential effects/benefits of using an engine flush
Removes deposits and carbon from all internal engine surfaces
Increases and/or equalises compression in the cylinders
Increases the efficiency of the oil system
Cleans and quiets hydraulic valve lifters
Improves engine efficiency by releasing piston rings
Reduces harmful emissions
Instructions for use
1
Start and warm up the engine
2
Turn off the engine
3
Unscrew the oil filler cap and pour the agent into the engine - 1 can of 500 ml per 5-6 litres of engine oil
4
Screw the oil filler cap back on
5
Restart the engine and leave it idling for about 15 to 20 minutes
6
Turn off the engine, unscrew the oil filter, and drain the used oil with the flush
7
Install a new oil filter and pour engine oil to the appropriate level
8
Start the engine for about 1 minute, turn off the engine, then check the oil level and top up to the appropriate level.
MA Professional - Engine Flush Power Tec 500 ml
A professional product for flushing the oil system of combustion engines, based on high-performance solvents, detergents, and lubricants. Thanks to its special formula, it effectively dissolves hard carbon deposits, sludge, and other difficult-to-remove contaminants, restoring full flow in oil channels and preparing the lubrication system for new oil. In case of compression problems caused by stuck piston rings, the product can be applied directly to the combustion chamber (after removing the spark plugs) and left for several hours to effectively dissolve the deposits. Releasing stuck rings improves compression, increases engine power, and its dynamics. Regular use of the product helps reduce oil consumption, decreases exhaust smoke, and reduces emissions. Suitable for all types of combustion engines. It is recommended to use it preventively with each oil change and remedially in case of compression problems.
Advantages:
1. High effectiveness. 2. Prepares the system for new oil. 3. Unblocks stuck rings.Instructions for use:
- Start and warm up the engine
- Turn off the engine
- Unscrew the oil filler cap and pour the product into the engine - 1 can of 500 ml per 5-6 litres of engine oil
- Screw the oil filler cap back on
- Restart the engine and leave it idling for about 15 to 20 minutes
- Turn off the engine, unscrew the oil filter, drain the used oil with the flush
- Install a new oil filter and pour engine oil to the appropriate level
- Start the engine for about 1 minute, turn off the engine, then check the oil level and top up to the appropriate level.
/20-B40%20MA%20PROFESSIONAL%20-%20P%C5%82ukanka%20do%20Silnika%20Power%20Tec%20500%20ml%20(5).jpg)
Description
Professional engine oil system flushing agent for internal combustion engines based on high-performance solvents, detergents, and lubricants. Thanks to its special formulation, the agent effectively dissolves hard carbon deposits, sludge, and other difficult-to-remove contaminants found in the engine's lubrication system. It prepares the oil system for new oil. In case of compression problems resulting from seized and blocked piston rings, the agent (after removing the spark plugs) can be applied directly to the combustion chamber and left for a few hours to penetrate and dissolve the deposits. As a result of releasing the seized rings, the engine will increase compression in the cylinders and significantly improve its dynamics and power. The product restores full flow capacity to the oil channels. It significantly reduces oil consumption and exhaust smoke, reducing harmful emissions. The agent is used for all types of internal combustion engines. A 500ml package is sufficient to flush an engine with an oil system capacity of 6 litres. In the case of a smaller system, the entire contents of the can can be poured without concern. The agent should be used preventively with each oil change in the engine and remedially in case of excessive oil burning or compression problems. The operation is completely safe for the engine.
When should you use an engine flush?
Preventively with each oil change
If the car is mainly driven in urban cycles
After purchasing a used car with an unknown service history
If there are long intervals between oil changes
Remedially when the following symptoms occur
When the engine burns oil in quantities exceeding factory specifications
Dark or blue smoke is coming from the exhaust system
Compression in individual cylinders is weak or there are significant differences
Valve lifters are audible
There is a noticeable drop in engine power
There is a drop or increase in oil pressure at idle
Potential effects/benefits of using an engine flush
Removes deposits and carbon from all internal engine surfaces
Increases and/or equalises compression in the cylinders
Increases the efficiency of the oil system
Cleans and quiets hydraulic valve lifters
Improves engine efficiency by releasing piston rings
Reduces harmful emissions
Instructions for use
1
Start and warm up the engine
2
Turn off the engine
3
Unscrew the oil filler cap and pour the agent into the engine - 1 can of 500 ml per 5-6 litres of engine oil
4
Screw the oil filler cap back on
5
Restart the engine and leave it idling for about 15 to 20 minutes
6
Turn off the engine, unscrew the oil filter, and drain the used oil with the flush
7
Install a new oil filter and pour engine oil to the appropriate level
8
Start the engine for about 1 minute, turn off the engine, then check the oil level and top up to the appropriate level.
MA Professional - Engine Flush Power Tec 500 ml
A professional product for flushing the oil system of combustion engines, based on high-performance solvents, detergents, and lubricants. Thanks to its special formula, it effectively dissolves hard carbon deposits, sludge, and other difficult-to-remove contaminants, restoring full flow in oil channels and preparing the lubrication system for new oil. In case of compression problems caused by stuck piston rings, the product can be applied directly to the combustion chamber (after removing the spark plugs) and left for several hours to effectively dissolve the deposits. Releasing stuck rings improves compression, increases engine power, and its dynamics. Regular use of the product helps reduce oil consumption, decreases exhaust smoke, and reduces emissions. Suitable for all types of combustion engines. It is recommended to use it preventively with each oil change and remedially in case of compression problems.
Advantages:
1. High effectiveness. 2. Prepares the system for new oil. 3. Unblocks stuck rings.Instructions for use:
- Start and warm up the engine
- Turn off the engine
- Unscrew the oil filler cap and pour the product into the engine - 1 can of 500 ml per 5-6 litres of engine oil
- Screw the oil filler cap back on
- Restart the engine and leave it idling for about 15 to 20 minutes
- Turn off the engine, unscrew the oil filter, drain the used oil with the flush
- Install a new oil filter and pour engine oil to the appropriate level
- Start the engine for about 1 minute, turn off the engine, then check the oil level and top up to the appropriate level.
Technical specification
for crankcase
for vehicle enginesfor cleaning
for flushingimproves engine work
revitalizationcoal deposit
oil deposits
sludgeReplacements
Engine oil additive for crankcase / for vehicle engines, diesel/petrol 090611090611See details
Engine oil additive for crankcase / for vehicle engines, diesel/petrol CRC MOTOR FLUSH 200MLCRC MOTOR FLUSH 200MLSee details
Engine oil additive for crankcase / for vehicle engines, diesel/petrol ENGINE OIL SYSTEM CLEANERENGINE OIL SYSTEM CLEANERSee details
Engine oil additive for crankcase / for vehicle engines, diesel/petrol MA 20-A38MA 20-A38See details
Engine oil additive for crankcase / for vehicle engines, diesel/petrol MTL 114292MTL 114292See details
Engine oil additive for crankcase / for vehicle engines, diesel/petrol STP 30-011STP 30-011See details