Transmission fluid ceramic additive for manual transmissions, diesel/petrol CB-M
Index: CB-M
Transmission fluid ceramic additive 0,04 kg CB-M for manual transmissions (Diesel/Petrol), application - advantages: ceramics; decreases friction; noise reduction; protection; revitalization, Tube
OPERATION DESCRIPTION:
Ceramizer CB-M - a high-quality preparation designed for the protection and revitalisation of manual gearboxes. The innovative formula of intelligent nano particles with high surface activity penetrates the metal structure, creating a durable stable protective coating (ceramic-metal) with a low coefficient of friction and excellent thermal conductivity properties. This allows for significant friction reduction and constant protection of components, practically eliminating their wear process. Regular use can significantly extend the lifespan of the gearbox. Provides protection for 100,000 KM. Recommended for all types of manual transmissions.
BENEFITS:
Facilitates gear shifting and synchroniser operation Quiets and stabilises the operation of transmission mechanisms Eliminates vibrations and noise Regenerates and extends the lifespan of the gearbox, transmission, and rear axles Reduces the risk of failure Hardens the outer surface of metal components and slows down their wear process - Creates a durable protective layer with very low friction coefficients and high resistance
IMPORTANT:
To achieve the best application effect, follow the instructions closely. The dosage of Ceramizer should be selected based on the "NUMBER OF PREPARATION DOSAGES" table. A lower dosage than specified in the table may not bring the expected revitalisation results. Ceramizer is intended for all types of transmission oils used in manual gearboxes. It can be used in both new and older vehicles with mileage over 1000 km. Using Ceramizer does not void the vehicle manufacturer's warranty. To keep the manual gearbox in good condition, remember to use Ceramizer regularly according to recommendations every 100,000 km.
HOW TO USE CERAMIZER PREPARATION:
- Heat the oil in the gearbox to an operating temperature of 80-90%, to achieve this, drive a short distance of 5 km.
- Turn off the engine.
- Add the appropriate amount of Ceramizer by applying it to the manual gearbox oil filler.
- Start the engine.
- Drive steadily for a distance of 10-15 km, changing the gear range several times from the lowest to the highest. After driving 10-15 km, normal vehicle operation can begin.
- The full process of revitalisation and mechanical regeneration will occur after driving 10,000 km.
- Remember not to change the engine oil during this time.
Description
OPERATION DESCRIPTION:
Ceramizer CB-M - a high-quality preparation designed for the protection and revitalisation of manual gearboxes. The innovative formula of intelligent nano particles with high surface activity penetrates the metal structure, creating a durable stable protective coating (ceramic-metal) with a low coefficient of friction and excellent thermal conductivity properties. This allows for significant friction reduction and constant protection of components, practically eliminating their wear process. Regular use can significantly extend the lifespan of the gearbox. Provides protection for 100,000 KM. Recommended for all types of manual transmissions.
BENEFITS:
Facilitates gear shifting and synchroniser operation Quiets and stabilises the operation of transmission mechanisms Eliminates vibrations and noise Regenerates and extends the lifespan of the gearbox, transmission, and rear axles Reduces the risk of failure Hardens the outer surface of metal components and slows down their wear process - Creates a durable protective layer with very low friction coefficients and high resistance
IMPORTANT:
To achieve the best application effect, follow the instructions closely. The dosage of Ceramizer should be selected based on the "NUMBER OF PREPARATION DOSAGES" table. A lower dosage than specified in the table may not bring the expected revitalisation results. Ceramizer is intended for all types of transmission oils used in manual gearboxes. It can be used in both new and older vehicles with mileage over 1000 km. Using Ceramizer does not void the vehicle manufacturer's warranty. To keep the manual gearbox in good condition, remember to use Ceramizer regularly according to recommendations every 100,000 km.
HOW TO USE CERAMIZER PREPARATION:
- Heat the oil in the gearbox to an operating temperature of 80-90%, to achieve this, drive a short distance of 5 km.
- Turn off the engine.
- Add the appropriate amount of Ceramizer by applying it to the manual gearbox oil filler.
- Start the engine.
- Drive steadily for a distance of 10-15 km, changing the gear range several times from the lowest to the highest. After driving 10-15 km, normal vehicle operation can begin.
- The full process of revitalisation and mechanical regeneration will occur after driving 10,000 km.
- Remember not to change the engine oil during this time.
Technical specification
for conservation
for prevention
for protecting
for protectionceramics
decreases friction
noise reduction
protection
revitalizationDiesel
Petrol