Transmission fluid ceramic additive for automatic transmissions, diesel/petrol CB-A
Index: CB-A
Transmission fluid ceramic additive 0,055 kg CB-A for automatic transmissions (Diesel/Petrol), application - advantages: ceramics; decreases friction; noise reduction; protection; revitalization, Tube
DESCRIPTION OF OPERATION:
Ceramizer - a high-quality preparation designed for the protection and revitalisation of automatic gearboxes. The innovative formula of intelligent nano particles with high surface activity penetrates the metal structure, creating a durable stable protective coating (ceramic-metal) with a low coefficient of friction and excellent thermal conductivity properties. This allows for significant friction reduction and constant protection of components, practically eliminating their wear process. Regular use can significantly extend the lifespan of the gearbox. Provides protection for 100,000 KM. Recommended for all types of automatic transmissions including Tiptronic, Steptronic, CVT.
BENEFITS:
Facilitates gear shifting and synchroniser operation Quiets and stabilises the operation of transmission mechanisms Eliminates vibrations and noise Regenerates and extends the lifespan of gearboxes, transmissions, and rear axles Reduces the risk of failure Hardens the outer surface of metal components and slows down their wear process Creates a durable protective layer with very low friction coefficients and high resistance
IMPORTANT:
To achieve the best effect, follow the instructions closely. The dosage of Ceramizer should be selected based on the "NUMBER OF DOSAGES OF THE PREPARATION" table. A lower dosage than specified in the table may not bring the expected revitalisation results. Ceramizer is intended for all types of transmission oils used in manual gearboxes. It can be used in both new and older vehicles with a mileage of over 1000 km. Using Ceramizer does not void the vehicle manufacturer's warranty. To keep the automatic gearbox in good condition, remember to use Ceramizer regularly according to the recommendations every 100,000 km.
HOW TO USE CERAMIZER PREPARATION:
- Heat the oil in the gearbox to an operating temperature of 80-90%, to achieve this, drive a short distance of 5 km.
- Turn off the engine.
- Add the appropriate amount of Ceramizer by applying it to the automatic gearbox oil filler.
- Start the engine.
- Drive steadily for a distance of 25-50 km, changing the gear range several times from the lowest to the highest. After driving 25-50 km, normal vehicle operation can begin.
- The full process of revitalisation and mechanical regeneration will occur after driving 50,000 km.
- Remember not to change the engine oil during this time.
Description
DESCRIPTION OF OPERATION:
Ceramizer - a high-quality preparation designed for the protection and revitalisation of automatic gearboxes. The innovative formula of intelligent nano particles with high surface activity penetrates the metal structure, creating a durable stable protective coating (ceramic-metal) with a low coefficient of friction and excellent thermal conductivity properties. This allows for significant friction reduction and constant protection of components, practically eliminating their wear process. Regular use can significantly extend the lifespan of the gearbox. Provides protection for 100,000 KM. Recommended for all types of automatic transmissions including Tiptronic, Steptronic, CVT.
BENEFITS:
Facilitates gear shifting and synchroniser operation Quiets and stabilises the operation of transmission mechanisms Eliminates vibrations and noise Regenerates and extends the lifespan of gearboxes, transmissions, and rear axles Reduces the risk of failure Hardens the outer surface of metal components and slows down their wear process Creates a durable protective layer with very low friction coefficients and high resistance
IMPORTANT:
To achieve the best effect, follow the instructions closely. The dosage of Ceramizer should be selected based on the "NUMBER OF DOSAGES OF THE PREPARATION" table. A lower dosage than specified in the table may not bring the expected revitalisation results. Ceramizer is intended for all types of transmission oils used in manual gearboxes. It can be used in both new and older vehicles with a mileage of over 1000 km. Using Ceramizer does not void the vehicle manufacturer's warranty. To keep the automatic gearbox in good condition, remember to use Ceramizer regularly according to the recommendations every 100,000 km.
HOW TO USE CERAMIZER PREPARATION:
- Heat the oil in the gearbox to an operating temperature of 80-90%, to achieve this, drive a short distance of 5 km.
- Turn off the engine.
- Add the appropriate amount of Ceramizer by applying it to the automatic gearbox oil filler.
- Start the engine.
- Drive steadily for a distance of 25-50 km, changing the gear range several times from the lowest to the highest. After driving 25-50 km, normal vehicle operation can begin.
- The full process of revitalisation and mechanical regeneration will occur after driving 50,000 km.
- Remember not to change the engine oil during this time.
Technical specification
for conservation
for prevention
for protecting
for protectionceramics
decreases friction
noise reduction
protection
revitalizationDiesel
Petrol
