Engine oil ceramic additive for vehicle engines, diesel CS-DP

OPERATION DESCRIPTION:

CERAMIZATOR CS-D POWER is a high-quality preparation designed for the protection and revitalisation of heavily loaded Diesel engines operated in extreme conditions where high temperatures occur. The innovative formula of intelligent nano particles with high surface activity penetrates the metal structure, creating a durable stable protective coating (ceramic-metal) with a low coefficient of resistance and excellent thermal conductivity properties. This allows for significant friction reduction and constant protection of components, practically eliminating their wear process. Regular use can significantly extend the engine's lifespan. Provides protection for 20,000 KM.

BENEFITS:

Regenerates and protects the engine and its mechanisms from wear Creates a durable protective layer with very low friction coefficients and high resistance Improves compression pressure in cylinders. Very fast action, effect achieved after 3 hours of engine operation or after driving 200 km. Reduces oil consumption Balances and quiets engine operation Reduces the risk of failure Reduces fuel consumption Increases power, torque, efficiency, and engine dynamics

IMPORTANT:

To achieve the best application effect, follow the instructions closely. The dosage of Ceramizator should be selected based on the "NUMBER OF PREPARATION DOSAGES" table. A lower dose of the preparation than provided in the table may not bring the expected revitalisation results. Ceramizator is intended for all types of engine oils. It can be used in mineral, semi-synthetic, and fully synthetic engine oils. It can be used in both new and older vehicles with a mileage of over 1000 km. Using Ceramizator does not void the vehicle manufacturer's warranty. To keep the engine in good condition, remember to use Ceramizator regularly according to the recommendations every 20,000 km.

HOW TO USE CERAMIZATOR PREPARATION:

• Start and warm up the engine to an operating temperature of 80-90%, to achieve this, drive a short distance of 2-5 km or leave the engine running at idle for 15 minutes.
• Turn off the engine.
• Add the appropriate amount of Ceramizator by applying it to the engine oil filler.
• Start the engine and leave it at idle for 15 minutes.
• Drive gently for 200 km without exceeding 2500 rpm. This can be done during normal vehicle operation. The required 200 km interval can be covered in one go (recommended) or in several stages.
• After gently driving 200 km, the full process of mechanical engine revitalisation and regeneration occurs.
• Remember not to change the engine oil during this time.

Designed for the protection and revitalisation of heavily loaded Diesel engines operated in extreme conditions where high temperatures occur