Oil heater without exhaust fumes transfer heating power 65 kW
Index: B230
Oil heater without exhaust fumes transfer, heating power: 65kW, fuel consumption: 6,2l/hour, air flow: 3000m³/h
Technical data
65 kW | |
Device dimensions: | 1200 x 575 x 790 mm |
Airflow: | 3.300 m3/h |
Fuel consumption | 5.2 kg/h |
Tank capacity: | 65 l |
Power supply: | 220-240/50-60 V/Hz |
Rated current: | 3.5 A |
Thermostat control | mechanical / electronic |
Net / gross weight: | 57 / 72 kg |
Oil heater without exhaust MASTER B 230
High-quality heater for heating oil or diesel. Portable, without exhaust, exceptionally efficient - all this in a compact size. The MASTER heater from the B 230 series provides immediate heating wherever you need it most. It does not require any installation. The compact housing, small size, and durable construction ensure easy transport and convenient and safe use. It can also work with a thermostat. The B 230 air heater has an extremely wide range of applications in factories, warehouses, sports halls, loading ramps, agricultural facilities, garages, construction sites (heating and drying), and anywhere a point heat source is needed immediately. B 230 heaters are made extremely solidly, ensuring high quality and durability in the toughest working conditions. Technical solutions (electronic flame control) guarantee high safety of use. The device is designed to heat rooms with a volume of up to 1700 m3. B 230 air heaters achieve 100% efficiency because all the heat from oil combustion is delivered to the heated room. The fan located at the back of the heater pushes air around the combustion chamber, ensuring its immediate heating. Additionally, it is easy to operate - the control panel is extremely simple to use, and the fuel filler location allows for convenient tank filling.
Advantages of the MASTER B 230 heater:
- almost 100% efficiency
- convenient operation and maintenance
- easy transport - portable device
- strong and durable construction
- durable exterior finish
- non-heating housing
- oil tank with standard oil level indicator
- large air flow
- motor with thermal protection (protected against high temperature)
- electronic flame indicator
- built-in photocell switch
- two oil filters: oil tank filter and suction filter
- external room thermostat socket
- wheel set as standard
- combustion chamber made of stainless steel
- shaped tank, facilitating filling
- large diameter wheels, facilitating transport
- external fuel pump
- high-efficiency motor
- built-in overheat thermostat
- galvanized oil tank
- NEW VERSION: new ignition system - improves ignition stability
- NEW VERSION: new transformer position facilitates servicing
- NEW VERSION: new flame indicator
- NEW VERSION: new fuel filter at the filler
- NEW VERSION: new, convenient fuel filler cap
- NEW VERSION: electrical components placed in a special protective pocket
- NEW VERSION: moving the turbo disc and electrodes away from the nozzle
- NEW VERSION: new solenoid valve position
- NEW VERSION: cooling controller - fan operates 60 seconds after device shutdown
- NEW VERSION: new transformer
- NEW VERSION: larger fan
- NEW VERSION: fuel filter in a transparent housing
- NEW VERSION: new fuel lines in metal braid
- NEW VERSION: copper fuel line replaced with plastic line - new line is completely flexible, withstands pressure up to 600 bar.
- NEW VERSION: new burner - has double electrodes, better heater ignition, easier assembly, fewer components - less failure
- NEW VERSION: DANFOSS pump replaced with new SUNTEC pump
Description
Technical data
65 kW | |
Device dimensions: | 1200 x 575 x 790 mm |
Airflow: | 3.300 m3/h |
Fuel consumption | 5.2 kg/h |
Tank capacity: | 65 l |
Power supply: | 220-240/50-60 V/Hz |
Rated current: | 3.5 A |
Thermostat control | mechanical / electronic |
Net / gross weight: | 57 / 72 kg |
Oil heater without exhaust MASTER B 230
High-quality heater for heating oil or diesel. Portable, without exhaust, exceptionally efficient - all this in a compact size. The MASTER heater from the B 230 series provides immediate heating wherever you need it most. It does not require any installation. The compact housing, small size, and durable construction ensure easy transport and convenient and safe use. It can also work with a thermostat. The B 230 air heater has an extremely wide range of applications in factories, warehouses, sports halls, loading ramps, agricultural facilities, garages, construction sites (heating and drying), and anywhere a point heat source is needed immediately. B 230 heaters are made extremely solidly, ensuring high quality and durability in the toughest working conditions. Technical solutions (electronic flame control) guarantee high safety of use. The device is designed to heat rooms with a volume of up to 1700 m3. B 230 air heaters achieve 100% efficiency because all the heat from oil combustion is delivered to the heated room. The fan located at the back of the heater pushes air around the combustion chamber, ensuring its immediate heating. Additionally, it is easy to operate - the control panel is extremely simple to use, and the fuel filler location allows for convenient tank filling.
Advantages of the MASTER B 230 heater:
- almost 100% efficiency
- convenient operation and maintenance
- easy transport - portable device
- strong and durable construction
- durable exterior finish
- non-heating housing
- oil tank with standard oil level indicator
- large air flow
- motor with thermal protection (protected against high temperature)
- electronic flame indicator
- built-in photocell switch
- two oil filters: oil tank filter and suction filter
- external room thermostat socket
- wheel set as standard
- combustion chamber made of stainless steel
- shaped tank, facilitating filling
- large diameter wheels, facilitating transport
- external fuel pump
- high-efficiency motor
- built-in overheat thermostat
- galvanized oil tank
- NEW VERSION: new ignition system - improves ignition stability
- NEW VERSION: new transformer position facilitates servicing
- NEW VERSION: new flame indicator
- NEW VERSION: new fuel filter at the filler
- NEW VERSION: new, convenient fuel filler cap
- NEW VERSION: electrical components placed in a special protective pocket
- NEW VERSION: moving the turbo disc and electrodes away from the nozzle
- NEW VERSION: new solenoid valve position
- NEW VERSION: cooling controller - fan operates 60 seconds after device shutdown
- NEW VERSION: new transformer
- NEW VERSION: larger fan
- NEW VERSION: fuel filter in a transparent housing
- NEW VERSION: new fuel lines in metal braid
- NEW VERSION: copper fuel line replaced with plastic line - new line is completely flexible, withstands pressure up to 600 bar.
- NEW VERSION: new burner - has double electrodes, better heater ignition, easier assembly, fewer components - less failure
- NEW VERSION: DANFOSS pump replaced with new SUNTEC pump
Technical specification
57.0kg
72.0kg