Adhesive hard plastic / plastics 25ml MA 20-A54
Index: MA 20-A54
Adhesive 25 ml, intended use (material): hard plastic / plastics, for bumpers
PRODUCT DESCRIPTION
Construction Adhesive
PRODUCT PROPERTIES
Construction adhesive for repairing damaged items made of plastics and other materials. Effectively repairs, for example, cracked bumpers and car mirrors, plastic grilles, and other components. Works on joined surfaces. The product creates a very durable flexible bond resistant to temperatures up to 120°C. It is resistant to automotive, transmission, and hydraulic oils, gasoline, water, and many other substances.
USAGE INSTRUCTIONS
1. Clean and degrease the surfaces to be repaired, then dry them.
2. To achieve the desired result, use sandpaper or a file to give the surface a rough texture.
3. Remove the seal from the applicators, squeeze an equal amount of mass from each tube, and mix thoroughly until a uniform creamy color is obtained.
4. Apply the prepared mass to the surfaces to be repaired.
5. Arrange the joined elements within 3-5 minutes, then press firmly for at least two hours.
6. If the ambient temperature is less than 5°C, the curing process takes longer.
7. Remove excess adhesive with a towel or cloth soaked in thinner.
8. After use, secure the tubes with the included cap.
Description
PRODUCT DESCRIPTION
Construction Adhesive
PRODUCT PROPERTIES
Construction adhesive for repairing damaged items made of plastics and other materials. Effectively repairs, for example, cracked bumpers and car mirrors, plastic grilles, and other components. Works on joined surfaces. The product creates a very durable flexible bond resistant to temperatures up to 120°C. It is resistant to automotive, transmission, and hydraulic oils, gasoline, water, and many other substances.
USAGE INSTRUCTIONS
1. Clean and degrease the surfaces to be repaired, then dry them.
2. To achieve the desired result, use sandpaper or a file to give the surface a rough texture.
3. Remove the seal from the applicators, squeeze an equal amount of mass from each tube, and mix thoroughly until a uniform creamy color is obtained.
4. Apply the prepared mass to the surfaces to be repaired.
5. Arrange the joined elements within 3-5 minutes, then press firmly for at least two hours.
6. If the ambient temperature is less than 5°C, the curing process takes longer.
7. Remove excess adhesive with a towel or cloth soaked in thinner.
8. After use, secure the tubes with the included cap.
Technical specification
Name
Adhesive
Intended use (material)
hard plastic
plasticsIntended use (parts, components)
for bumpers
Intended use (for work)
for mechanical processing
Count of components
2.0(none)
Capacity
25ml
