Adhesive metals and their composites / plastics 25ml MA 20-A99
Index: MA 20-A99
Adhesive 25 ml Grey Power Plastic Extreme, intended use (material): metals and their composites / plastics
Grey Power Plastic Extreme 10 min – Two-component methacrylate adhesive - GREY
High-quality methacrylate structural adhesive for very strong bonding/filling of various materials. Excellent resistance to weather conditions and temperatures from -40°C to +180°C (short-term). Permanently bonds many different materials such as ABS, PVC, PET and other plastics, metals, and other composites except for polyethylene and polypropylene. Once fully cured, the product exhibits very high resistance to shear, tearing, impact, pressure, and fatigue. The adhesive has extraordinary filling properties. The maximum gap size intended for filling can range from 1 to 5 mm. Special mixers included with the adhesive ensure proper mixing of both components.
Before starting bonding/filling, the surfaces to be repaired must be dry and clean/degreased.
Instructions for use
1
Turn 90° to the left and remove the special cap to expose the outlet nozzles.
2
Squeeze out a small amount of both components.
3
Attach the mixer to the outlet nozzles and turn 90° to the right. The adhesive is ready to use. By pressing both plungers, push the adhesive through the mixer.
As the adhesive passes through the mixer, it is thoroughly mixed.
Description
Grey Power Plastic Extreme 10 min – Two-component methacrylate adhesive - GREY
High-quality methacrylate structural adhesive for very strong bonding/filling of various materials. Excellent resistance to weather conditions and temperatures from -40°C to +180°C (short-term). Permanently bonds many different materials such as ABS, PVC, PET and other plastics, metals, and other composites except for polyethylene and polypropylene. Once fully cured, the product exhibits very high resistance to shear, tearing, impact, pressure, and fatigue. The adhesive has extraordinary filling properties. The maximum gap size intended for filling can range from 1 to 5 mm. Special mixers included with the adhesive ensure proper mixing of both components.
Before starting bonding/filling, the surfaces to be repaired must be dry and clean/degreased.
Instructions for use
1
Turn 90° to the left and remove the special cap to expose the outlet nozzles.
2
Squeeze out a small amount of both components.
3
Attach the mixer to the outlet nozzles and turn 90° to the right. The adhesive is ready to use. By pressing both plungers, push the adhesive through the mixer.
As the adhesive passes through the mixer, it is thoroughly mixed.
Technical specification
ABS
PET
PVCmetals and their composites
plastics