Sandpaper disc P1000 75mm 15 pcs
Index: 50413 3M
Sandpaper, Trizact, disc diameter 75 mm, gradation P1000 15pcs, colour grey
Fine-grained finishing disc 3M™ Trizact™ Hookit™ 443SA, 75 mm, 1000, 50413
Prepare shaded areas for painting and achieve consistent results using 3M™ Trizact™ Hookit™ blending discs. These foam-backed abrasive discs are designed for matting and sanding shaded panels, texturing orange peel, and removing scratches caused by sanding before matching the paint shade on adjacent panels. Used wet, they eliminate the need for matting agents or wet sanding abrasives.
Details
- Designed for matting shaded panels, texturing orange peel, and removing fine scratches after sanding before matching the paint shade.
- Always used wet, they eliminate the need for matting agents and wet sanding abrasives.
- Foam backing provides great control and consistent contact with the surface.
- Thanks to their flexibility, they matte recesses and orange peel textured surfaces without excessive levelling.
- Creates a dense scratch pattern in blending areas, eliminating all shiny spots and leaving a matte finish.
3M™ Trizact™ Hookit™ 1000 blending discs provide a more predictable finish than traditional sanding discs — allowing for a consistent matte finish without shiny spots or burn-through. Used for matting shaded panels, texturing orange peel, and removing fine scratches after sanding, they create the scratch pattern needed for all base colours and clear coats to properly cover and adhere to the surface. To ensure long life and uniform sanding, 3M™ Trizact™ abrasives are built with three-dimensional structures that continuously wear down to reveal new, sharp abrasive mineral. They are virtually self-sharpening. 3M™ Trizact™ Hookit™ 1000 blending discs have a foam backing to provide better control and feel during sanding. Use the 3M™ Hookit™ backing pad to attach the discs to a dual-action sander or hand block. Used wet, they eliminate the need for matting agents or wet sanding abrasives.
Description
Fine-grained finishing disc 3M™ Trizact™ Hookit™ 443SA, 75 mm, 1000, 50413
Prepare shaded areas for painting and achieve consistent results using 3M™ Trizact™ Hookit™ blending discs. These foam-backed abrasive discs are designed for matting and sanding shaded panels, texturing orange peel, and removing scratches caused by sanding before matching the paint shade on adjacent panels. Used wet, they eliminate the need for matting agents or wet sanding abrasives.
Details
- Designed for matting shaded panels, texturing orange peel, and removing fine scratches after sanding before matching the paint shade.
- Always used wet, they eliminate the need for matting agents and wet sanding abrasives.
- Foam backing provides great control and consistent contact with the surface.
- Thanks to their flexibility, they matte recesses and orange peel textured surfaces without excessive levelling.
- Creates a dense scratch pattern in blending areas, eliminating all shiny spots and leaving a matte finish.
3M™ Trizact™ Hookit™ 1000 blending discs provide a more predictable finish than traditional sanding discs — allowing for a consistent matte finish without shiny spots or burn-through. Used for matting shaded panels, texturing orange peel, and removing fine scratches after sanding, they create the scratch pattern needed for all base colours and clear coats to properly cover and adhere to the surface. To ensure long life and uniform sanding, 3M™ Trizact™ abrasives are built with three-dimensional structures that continuously wear down to reveal new, sharp abrasive mineral. They are virtually self-sharpening. 3M™ Trizact™ Hookit™ 1000 blending discs have a foam backing to provide better control and feel during sanding. Use the 3M™ Hookit™ backing pad to attach the discs to a dual-action sander or hand block. Used wet, they eliminate the need for matting agents or wet sanding abrasives.
