Putty soft steel
Index: MF 1257
MULTI FULLER Putty soft LIGHT with hardener, 1l, intended use: steel,
Light
Finishing polyester filler
Variant
| Colour | Gloss level | Net weight |
|---|---|---|
| Cream | matte | 1 kg |
2-component lightweight, filling polyester filler for car body repairs. The lower specific weight means it does not burden the surface like other fillers.
Advantages
- Low density.
- Easy mixing and application process.
- Very good sanding quality.
Substrates
The product is characterised by very good adhesion to various substrates. It can be applied to:
- Steel and aluminium after matting and degreasing.
- Galvanised steel after matting and degreasing.
- Sanded fibreglass (GFK/GRP), polyester fillers, acrylic and epoxy primers, and old coatings in good condition.
- Well-sanded old or factory paint coatings.
We recommend sandpaper with a grit of: P80 ÷ P120.
Note: Do not apply polyester fillers directly on reactive primers, 1-component acrylic products, and nitrocellulose products.
Important information regarding product use
Degrease
Mix by weight
100 : 2
Pot life
4 ÷ 7 min. / 20°C
Curing time
20 ÷ 30 min. / 20°C
P80 ÷ P120
P120 ÷ P320
Description
Light
Finishing polyester filler
Variant
| Colour | Gloss level | Net weight |
|---|---|---|
| Cream | matte | 1 kg |
2-component lightweight, filling polyester filler for car body repairs. The lower specific weight means it does not burden the surface like other fillers.
Advantages
- Low density.
- Easy mixing and application process.
- Very good sanding quality.
Substrates
The product is characterised by very good adhesion to various substrates. It can be applied to:
- Steel and aluminium after matting and degreasing.
- Galvanised steel after matting and degreasing.
- Sanded fibreglass (GFK/GRP), polyester fillers, acrylic and epoxy primers, and old coatings in good condition.
- Well-sanded old or factory paint coatings.
We recommend sandpaper with a grit of: P80 ÷ P120.
Note: Do not apply polyester fillers directly on reactive primers, 1-component acrylic products, and nitrocellulose products.
Important information regarding product use
Degrease
Mix by weight
100 : 2
Pot life
4 ÷ 7 min. / 20°C
Curing time
20 ÷ 30 min. / 20°C
