Putty spray acrylic primer, aluminium, epoxy primer, steel 1kg
Index: MF 2363
MULTI FULLER Putty spray with hardener, 1kg, intended use: acrylic primer, aluminium, epoxy primer, steel, colour: beige
Spray Filler
Polyester Spray Filler.
Variant
| Colour | Gloss level | Net weight |
|---|---|---|
| Light grey | matte | 1 kg |
High-quality 2-component spray filler intended for car repairs. It is excellent for filling scratches that occur after processing previously applied fillers. Requires thinning.
Advantages
- Easy application process.
- Short curing time.
- Very good at isolating primers and topcoats from polyester fillers.
- Good filling properties.
Substrates
The product is characterised by very good adhesion to various substrates. It can be applied to:
- Steel and aluminium after matting and degreasing.
- Sanded fibreglass (GFK/GRP), polyester fillers, acrylic and epoxy primers, and old coatings in good condition.
Note: Do not apply polyester fillers directly on reactive primers, 1-component acrylic products, and nitrocellulose products.
Important information regarding product use
Degrease
Mixing ratio
100 : 4.5 + 10%
Spray viscosity
~ 50s / 20°C
Pot life
20 min. / 20°C
1÷3 layers HVLP / RP
ø2.0÷ 3.0 mm
between layers
~5 min.
before baking
~10 min.
Curing time
2 ÷ 3 h / 20°C
25 ÷ 30 min. / 60°C
P180 ÷ P320
Description
Spray Filler
Polyester Spray Filler.
Variant
| Colour | Gloss level | Net weight |
|---|---|---|
| Light grey | matte | 1 kg |
High-quality 2-component spray filler intended for car repairs. It is excellent for filling scratches that occur after processing previously applied fillers. Requires thinning.
Advantages
- Easy application process.
- Short curing time.
- Very good at isolating primers and topcoats from polyester fillers.
- Good filling properties.
Substrates
The product is characterised by very good adhesion to various substrates. It can be applied to:
- Steel and aluminium after matting and degreasing.
- Sanded fibreglass (GFK/GRP), polyester fillers, acrylic and epoxy primers, and old coatings in good condition.
Note: Do not apply polyester fillers directly on reactive primers, 1-component acrylic products, and nitrocellulose products.
Important information regarding product use
Degrease
Mixing ratio
100 : 4.5 + 10%
Spray viscosity
~ 50s / 20°C
Pot life
20 min. / 20°C
1÷3 layers HVLP / RP
ø2.0÷ 3.0 mm
between layers
~5 min.
before baking
~10 min.
Curing time
2 ÷ 3 h / 20°C
25 ÷ 30 min. / 60°C
P180 ÷ P320
Technical specification
acrylic primer
aluminium
epoxy primer
steel
