Putty visor steel 1,8kg
Index: MF 5465
MULTI FULLER Putty visor SOFT & FAST with hardener, 1,8kg, intended use: steel,
K47 Soft & Fast
Soft, filling polyester putty
Variant
| Colour | Gloss level | Net weight |
|---|---|---|
| Light beige | matte | 1.8 kg |
Soft polyester putty designed for quick repairs. The product is characterised by a very short curing time and easy, convenient application, with no tendency to sag or slip during application on vertical surfaces.
Advantages
- Easy application without sagging and slipping.
- Very short curing time.
- Minimal surface stickiness.
- Good sanding properties.
Substrates
The product is characterised by very good adhesion to various substrates. It can be applied to:- Bare steel and aluminium after matting and degreasing.
- Galvanised steel after matting and degreasing.
- Sanded fibreglass (GFK/GRP), polyester putties, acrylic and epoxy primers, and old coatings in good condition
We recommend sandpaper with a grit of: P80 ÷ P120.
Note: Do not apply polyester putties directly on reactive primers, 1-component acrylic products, and nitrocellulose products.
Important information regarding product use
Degrease
Mix by weight
100 : 2
Pot life
4 ÷ 5 min. / 20°C
Curing time
20 ÷ 30 min. / 20°C
P80 ÷ P120
P120 ÷ P320
Description
K47 Soft & Fast
Soft, filling polyester putty
Variant
| Colour | Gloss level | Net weight |
|---|---|---|
| Light beige | matte | 1.8 kg |
Soft polyester putty designed for quick repairs. The product is characterised by a very short curing time and easy, convenient application, with no tendency to sag or slip during application on vertical surfaces.
Advantages
- Easy application without sagging and slipping.
- Very short curing time.
- Minimal surface stickiness.
- Good sanding properties.
Substrates
The product is characterised by very good adhesion to various substrates. It can be applied to:- Bare steel and aluminium after matting and degreasing.
- Galvanised steel after matting and degreasing.
- Sanded fibreglass (GFK/GRP), polyester putties, acrylic and epoxy primers, and old coatings in good condition
We recommend sandpaper with a grit of: P80 ÷ P120.
Note: Do not apply polyester putties directly on reactive primers, 1-component acrylic products, and nitrocellulose products.
Important information regarding product use
Degrease
Mix by weight
100 : 2
Pot life
4 ÷ 5 min. / 20°C
Curing time
20 ÷ 30 min. / 20°C
