Semi-automatic welder MIG/MAG 3540083N

Double pulse current welding (DOUBLE PULSE) allows for the regulation of current pulsation used for material joining, as well as wire feed speed. Thanks to double pulsation, an improvement in the appearance and profile of the weld can be achieved. In practice, this is an automatic welding mode. The welder moves the torch, and the device lays the weld and makes the penetration. Very useful when welding aluminium.

Advantages:

• Equipped with a graphical interface with a high-resolution 4.3” colour display.
• TIG welding with a start from contact “lift”.
• Possibility of TIG pulse welding.
• Suitable for welding in MMA-SMAW mode with both rutile and basic electrodes.
• Can be connected to engine-driven generators with appropriate power.
• Equipped with a EURO type connector for MIG/MAG and TIG torches.
• Equipped with a PFC device (power factor correction), which reduces and stabilises power consumption.
• Possibility to activate a security password.

In MIG/MAG mode:

• performs short, two-level short, pulse and double pulse synergic welding;
• it is possible to select a synergic program depending on the type and diameter of the wire and the shielding gas used;
• has curves optimised for steel, stainless steel, aluminium, MIG brazing and flux-cored wire;
• synergic programs for steel allow working with mixed gases Ar+8/18/25%CO2 or 100% CO2;
• by selecting manual mode, it is possible to modify welding parameters;
• dedicated control is provided for precise arc length tuning.

Included:

- ground cable

The device is not equipped with a welding cable.

Optional equipment:

- MIG welding torch,

- TIG welding torch,

- MMA welding torch,

- transport trolley,

- aluminium kit containing: Teflon insert, guide roller and 1.0 mm current tip - for MIG aluminium welding.

Technical data:

• Power supply: 1x230V 50-60Hz
• Stepless adjustment: electronic
• Double Pulse mode: installed
• Spool size: Ø 200 mm – 5 Kg
• Electrodes: Ø 1.6 - 4 mm
• Menu language: Polish, English and others
• Installed power:
• MIG 30% (6 kVA), 60% (4.6 kVA), 100% (4.2 kVA)
• TIG 30% (6 kVA), 60% (4.6 kVA), 100% (4.2 kVA)
• MMA 40% (5.3 kVA), 60% (4.5 kVA), 100% (4 kVA)
• Amperage range:
• MIG 20÷200A short, 20÷160A pulse
• TIG 10÷200A
• MMA 20÷160A
• Efficiency:
• MIG 30% (200A), 60% (155A), 100% (140A)
• TIG 30% (200A), 60% (155A), 100% (140A)
• MMA 40% (160A), 60% (135A), 100% (120A)
• Types and diameters of wires Ø mm:
• 0.6/0.8/0.9/1.0/1.2 Fe-Inox
• 0.8