Semi-automatic welder MIG/MAG PMIG200

Inverter semi-automatic welder for MIG-MAG, MMA, and FLUX welding. Welding current 200A. Power supply 230V. Welding wire diameter 0.6-0.8mm. 2-roll wire feeder.

 

Characteristics:

 

• Inverter semi-automatic welder recommended for sheet metal and workshop applications.
• Allows welding using the MIG-MAG method with gas-shielded welding wire, FLUX with self-shielding welding wire, and MMA method.
• Has the ability to change the polarity of the holder for welding with self-shielding wire.
• Single-phase power supply.
• Maximum spool with wire: 5 kg.
• 2.2m welding torch permanently mounted.
• Smooth adjustment of welding current.
• When welding using the MIG-MAG method, it is possible to adjust: welding current, wire feed speed.
• Wire feeder: 2-roll, with a 0.6-0.8 roller for steel wire.
• Fan-cooled.
• Overload protection.
• Price of the device with accessories: welding torch, ground cable, and welding mask.

 

PHYSICAL PARAMETERS
Protection degree	IP21S
Weight	14.7 kg
TECHNICAL PARAMETERS
Power	5.2 kW
Open circuit voltage	56 V
Current at 60% duty cycle	180 A
Self-shielding wire diameter	0.8 - 0.9
Steel wire diameter	0.6 - 0.8
Stainless steel wire diameter	0.6 - 0.8
Welding current adjustment range	30 - 200 A
POWER SUPPLY PARAMETERS
Current drawn from the network	20 A
Rated supply voltage	230 V; 50Hz (1ph)
Current drawn from the network	24.6 A (230V) / 20 A (400V)
Rated supply voltage	230/400 V; 50Hz (1ph/2ph)