Semi-automatic welder MIG/MAG EXMIG301P

EXPERT MIG 301 PULSE Pro7 LCD

Basic Information

Microprocessor-controlled inverter, advanced welding source for MIG/MAG, FLUX, TIG LIFT, and MMA welding methods. Single and double pulse. Welding current 300A. Power supply 3x400V. 4-roll wire feeder. Welding wire diameter 0.8-1.6mm.

Technical Parameters

EXPERT MIG 301 PULSE Pro7 LCD is an inverter, synergic, and multifunctional welding source designed for arc welding using MIG/MAG, FLUX, TIG LIFT, and MMA (shielded electrode) methods. It also allows for pulse current welding: single PULSE and double PULSE. The device is designed for a wide range of applications: from maintenance work, through welding steel structures, to car body repairs.

EXPERT MIG 301 is used for brazing galvanized sheets, welding stainless steel, carbon and low-alloy steels, and aluminium. Welding is carried out in an inert, active, or mixed gas shield, and with reverse polarity without gas.

Quick synergic adjustment of welding parameters via a 7-inch touch LCD display makes the device very easy to use. Simply set the thickness and type of material to be welded and start welding: the intelligent and automatic arc control system will select the best parameters, step by step, for each welding position and material. The user can also manually set the arc length and adjust the appearance of the weld to their needs. In the MIG/MAG method, we have the option to choose the button mode on the handle, between working in SPOT mode (spot welding), 2-stroke (no lock), 4-stroke (button lock for long welds), S2-stroke, and S4-stroke.

The device has a manual mode (MIG MAN) and a synergic mode (MIG SYN) with the ability to adjust:

• gas before welding
• gas after welding
• wire approach
• wire burn-back
• voltage correction
• spot welding time
• inductance
• current rise/fall

In the MIG/MAG method, there are also pulse modes (PULSE, DP), which additionally include functions such as:

• Arc length in pulse
• Arc length at start/end current
• Base current in pulse
• Pulsation time

In the TIG LIFT welding method, you can set:

• Welding current
• Current fall time
• Final shielding gas flow
• Button mode: 2T or 4T
• Thickness of the welded material

Welding with the MMA (shielded electrode) method allows for additional functions:

• HOT START
• HOT START time
• ARC FORCE

The device has an advanced system for saving and reading welding parameters (JOB Function). This facilitates work on different materials without the need to reset the device for any changes (e.g., gas or wire).

Physical Parameters

The device has a fan cooling system which significantly increases its efficiency.

Fan cooling system - NORMAL or SMART mode (activated only when needed) - reduces internal contamination of the device.

The device is equipped with overload protection, over and under voltage protection, for working with a power generator (+/- 15%) which increases its reliability.

Power Supply Parameters

Three-phase power supply 3x400V.

The device is equipped with a power plug.

Equipment

The delivery includes the device with a MIG 36 welding torch with a Teflon liner 3 meters long and electrode and ground cables 3 meters long. Additionally, the set includes a hose with a quick connector.

Warranty Conditions

12-month warranty for professional use.