Semi-automatic welder MIG/MAG V-MIG285MMA

 

Professional inverter semi-automatic welder for MIG-MAG welding with welding wire in gas shield and MMA method. Welding current 280A. Power supply 400V. Welding wire diameter 0.6-1.0mm. 4-roller wire feeder

 

Characteristics:

 

• Professional inverter semi-automatic welder for MIG-MAG welding with welding wire in gas shield and MMA method.
• Allows welding of steel, stainless steel, and aluminium alloys.
• The device has a welding current stabilization system ensuring the achievement of the set output parameters. This guarantees control of the current supplied to the welded material and high-quality welds.
• Three-phase power supply.
• Maximum spool with wire: 15 kg.
• The device is equipped with a EURO socket for connecting the welding torch.
• Electronically controlled smooth adjustment of welding current and wire feed speed.
• Smoothly adjustable electronic choke allows for minimal spatter during welding.
• When welding with the MIG-MAG method: adjustment of welding current, wire feed speed, and wire burn-back time (free end adjustment).
• Equipped with a digital meter (voltmeter, ammeter).
• Professional wire feeder: 4-roller, ensures stable feed of the filler.
• Fan-cooled.
• Overload protection.
• Price of the device with accessories: MIG 25/3m welding torch with EURO plug, wire guide rollers 0.8-1.0V and 1.0-1.2V, 3m ground cable, electrode holder for MMA welding method.

 

PHYSICAL PARAMETERS
Protection degree	IP 21
Weight	51 kg
Overall dimensions L x W x H	910x290x680 mm
TECHNICAL PARAMETERS
Open circuit voltage	50 V
Maximum current	280 A (MIG) / 200 A (MMA)
Current at 60% duty cycle	280 A
Aluminium wire diameter	0.8 - 1.2 mm
Steel wire diameter	0.8 - 1.0 mm
Welding electrode diameter	1.6 - 4.0 mm
Welding current adjustment range	50 - 280 A (MIG) / 50 - 200A (MMA)
POWER SUPPLY PARAMETERS
Current drawn from the network	14 A
Rated supply voltage	3x400 V; 50Hz (3ph)
Rated supply voltage	230 V; 50Hz (1ph)