Stamp hoists MASTERLIFT 2.35 NXT PV
Index: MASTERLIFT 2.35 NXT PV
Stamp hoist, lifting capacity: 3500 kg, maximum lifting height: 1980 mm
NEW GENERATION OF UNDERFLOOR LIFTS!!!
Two-post lift with heads adjustable longitudinally and transversely.
Masterlift 2.35 NxT Pv with a lifting capacity of 3.5 tonnes and a lifting height of 1,980 mm.
Ideal for reception areas, repair workshops, body shops, and other tasks.
In standard execution, it is delivered according to order with load-bearing platforms in lengths:
140-200 cm
160-220 cm
170-240 cm
Description:
Synchronization is achieved via a synchronization beam.
Maximum stability is achieved thanks to strong 140 mm cylinders and new aluminium guides made from anodized, solid material.
Thanks to the new cassette cover, even large forces acting on the cover during battery removal from the car are safely absorbed.
Advantages of the lift:
quick and easy drive onto the lift
full access to the entire vehicle
space-saving
set of xy plates adjustable transversely
increases the range of accepted vehicles
ADDITIONAL EQUIPMENT:
built-in control console
with media connections and holder for stands
rubber blocks – various heights
Two-post lift with heads adjustable longitudinally and transversely.
Masterlift 2.35 NxT Pv with a lifting capacity of 3.5 tonnes and a lifting height of 1,980 mm.
Ideal for reception areas, repair workshops, body shops, and other tasks.
In standard execution, it is delivered according to order with load-bearing platforms in lengths:
140-200 cm
160-220 cm
170-240 cm
Description:
Synchronization is achieved via a synchronization beam.
Maximum stability is achieved thanks to strong 140 mm cylinders and new aluminium guides made from anodized, solid material.
Thanks to the new cassette cover, even large forces acting on the cover during battery removal from the car are safely absorbed.
Advantages of the lift:
quick and easy drive onto the lift
full access to the entire vehicle
space-saving
set of xy plates adjustable transversely
increases the range of accepted vehicles
ADDITIONAL EQUIPMENT:
built-in control console
with media connections and holder for stands
rubber blocks – various heights
technical data
Lifting capacity 3,500 kg
Stroke length 1,915 mm
Working height 1,980 mm
Cylinder diameter 2 x 140 mm
Cylinder distance 1,550 mm
Lifting/lowering time ~ 30 sec.
Hydraulic pump 3 kW
Voltage 400 V / 50 Hz / 16 A
Lifting unit
Total length, min.-max
1,400-2,000 mm
1,600-2,200 mm
1,700-2,400 mm
Drive-over height
65 mm
Description
NEW GENERATION OF UNDERFLOOR LIFTS!!!
Two-post lift with heads adjustable longitudinally and transversely.
Masterlift 2.35 NxT Pv with a lifting capacity of 3.5 tonnes and a lifting height of 1,980 mm.
Ideal for reception areas, repair workshops, body shops, and other tasks.
In standard execution, it is delivered according to order with load-bearing platforms in lengths:
140-200 cm
160-220 cm
170-240 cm
Description:
Synchronization is achieved via a synchronization beam.
Maximum stability is achieved thanks to strong 140 mm cylinders and new aluminium guides made from anodized, solid material.
Thanks to the new cassette cover, even large forces acting on the cover during battery removal from the car are safely absorbed.
Advantages of the lift:
quick and easy drive onto the lift
full access to the entire vehicle
space-saving
set of xy plates adjustable transversely
increases the range of accepted vehicles
ADDITIONAL EQUIPMENT:
built-in control console
with media connections and holder for stands
rubber blocks – various heights
Two-post lift with heads adjustable longitudinally and transversely.
Masterlift 2.35 NxT Pv with a lifting capacity of 3.5 tonnes and a lifting height of 1,980 mm.
Ideal for reception areas, repair workshops, body shops, and other tasks.
In standard execution, it is delivered according to order with load-bearing platforms in lengths:
140-200 cm
160-220 cm
170-240 cm
Description:
Synchronization is achieved via a synchronization beam.
Maximum stability is achieved thanks to strong 140 mm cylinders and new aluminium guides made from anodized, solid material.
Thanks to the new cassette cover, even large forces acting on the cover during battery removal from the car are safely absorbed.
Advantages of the lift:
quick and easy drive onto the lift
full access to the entire vehicle
space-saving
set of xy plates adjustable transversely
increases the range of accepted vehicles
ADDITIONAL EQUIPMENT:
built-in control console
with media connections and holder for stands
rubber blocks – various heights
technical data
Lifting capacity 3,500 kg
Stroke length 1,915 mm
Working height 1,980 mm
Cylinder diameter 2 x 140 mm
Cylinder distance 1,550 mm
Lifting/lowering time ~ 30 sec.
Hydraulic pump 3 kW
Voltage 400 V / 50 Hz / 16 A
Lifting unit
Total length, min.-max
1,400-2,000 mm
1,600-2,200 mm
1,700-2,400 mm
Drive-over height
65 mm
Technical specification
Name
Stamp hoist
Kind
dwustemplowy
Support type
głowice przesuwane wzdłużnie i poprzecznie
Lifting capacity
3500.0kg
Maximum lifting height
1980.0mm