Tyre test basin UNITROL WANNA
Index: UNITROL WANNA
Tyre test basin PNEUBAD-1 ; pressure bar :6-10 ; water tank capacity :437l ; 80kg
Vulcanising tank PNEUBAD-1 is a device used for checking the airtightness of inner tubes and tubeless tyres of passenger cars and delivery vehicles. The inner tube being checked is submerged in water using a pneumatic actuator, controlled by a lever valve, allowing the piston to be stopped in any position.
The outlets of compressed air to the atmosphere are equipped with noise silencers.
The lightweight tank made of plastic is freely placed on the base and can be easily removed and tilted for cleaning its interior.
A ball-type drain valve is installed at the bottom of the tank.
The pressing umbrella is equipped with a basket that facilitates the insertion and removal of the wheel from the tank, and also allows the wheel to be dried after being removed from the water.
| |
|
|
supply air pressure | 0.6 to 1.0 MPa |
total tank volume | 437 L |
recommended water level - from the top edge of the tank | working 200 mm / maximum 110 mm |
tank emptying time through the drain valve | approx. 35 min. |
external dimensions | 1265 x 1040 x 2300 mm |
internal diameter of the tank | 980 mm |
working water volume in the tank | approx. 300 L |
dry weight of the device | 80 kg |
range of controlled wheels | diam. up to 890 mm, width up to 290 mm |
Description
Vulcanising tank PNEUBAD-1 is a device used for checking the airtightness of inner tubes and tubeless tyres of passenger cars and delivery vehicles. The inner tube being checked is submerged in water using a pneumatic actuator, controlled by a lever valve, allowing the piston to be stopped in any position.
The outlets of compressed air to the atmosphere are equipped with noise silencers.
The lightweight tank made of plastic is freely placed on the base and can be easily removed and tilted for cleaning its interior.
A ball-type drain valve is installed at the bottom of the tank.
The pressing umbrella is equipped with a basket that facilitates the insertion and removal of the wheel from the tank, and also allows the wheel to be dried after being removed from the water.
| |
|
|
supply air pressure | 0.6 to 1.0 MPa |
total tank volume | 437 L |
recommended water level - from the top edge of the tank | working 200 mm / maximum 110 mm |
tank emptying time through the drain valve | approx. 35 min. |
external dimensions | 1265 x 1040 x 2300 mm |
internal diameter of the tank | 980 mm |
working water volume in the tank | approx. 300 L |
dry weight of the device | 80 kg |
range of controlled wheels | diam. up to 890 mm, width up to 290 mm |
Technical specification
10.0bar
6.0bar1040.0mm
1265.0mm
2300.0mm