Walnut blasting unit 0XWQ3010

Car Engine Carbon Deposition Cleaner Getting Started Car engine carbon deposition cleaner-WQ3010 is a special tool for cleaning carbon deposition in the intake and exhaust pipes and intake and exhaust valves. It can ensure that the engine can continuously provide high-quality power while maintaining the health of the engine. Sometimes the high-precision engine system is sensitive to foreign objects in the intake pipe, such as the BMW valve electronic system. The carbon deposition of such vehicles requires an advanced carbon deposition cleaning equipment. As an advanced option, WQ3010 can effectively help remove the carbon deposition in the intake pipe and restore the auto to a healthy state. Superior Quality WQ3010 walnut sand carbon deposit cleaning machine, equipped with high-quality motor, bursts with high suction, has super supercharged suction, supports thousands of blows to decompose carbon deposits into small particles, runs stably, and the quality is visible. Integrated Operation WQ3010 are integrated operations. For example, when the sprayed walnut sand particles impact the carbon deposition, the walnut sand particles will also be recovered at the same time, and there is no need for repeated processing. The integrated professional design saves time and effort. Installation And Connection After unpacking, move the machine to the work area, then take out the particle recovery hose from the accessory storage compartment and install it on the suction pipe interface. Take out the hose bend of the recovery particle from the accessory storage compartment and install it on the recovery particle hose. Take out the long pipe or short pipe of the sandblasting gun from the accessory storage compartment and install it on the sandblasting gun. Insert the sand blasting gun into the round hole on the hose bend of the recovery particle hose. Connect the quick coupler of external air source to the air source connector of the product. Plug the power cord into the external power socket. Preparatory Work Open the latches at both ends of the machine, remove the machine head cover, take out the filter cartridge, take out the walnut sand from the accessory storage compartment and add it into the stainless bucket (it is recommended to add 3-5kg walnut sand.), and then install the filter cartridge and the machine head cover in turn. Take out the goggles from the accessory storage compartment and wear them. Disassemble the automotive engine intake manifold and observe the carbon deposition in the cylinder and the valves and whether the intake and exhaust valves are closed. Confirm that the sand blasting gun, the hose bend of the recovery particle and the model adapter have been completed according to the corresponding matching. Operation Process Turn on the power switch, and the machine starts to work. Select the working mode (low- speed, high- speed). Connect the sandblasting gun and hose connector together to the engine manifold port, and confirm that they are well sealed. Pull the sandblasting switch and start to enter the de-carbon procedure (generally, one manifold port can be cleaned up for about 2 minutes and then stop to check the cleaning effect). After cleaning the carbon deposits, use a dust blowing gun to blow out the remaining sand particles. Maintenance Service Our products are made of long-lasting and durable materials, and we insist on perfect production process. Each product leaves the factory after 35 procedures and 12 times of testing and inspection work, which ensures that each product has excellent quality and performance. Maintenance To maintain the performance and appearance of the product, it is recommended that the following product care guidelines be read carefully: Be careful not to rub the product against rough surfaces or wear the product, especially the sheet metal housing. Please regularly check the product parts that need to be tightened and connected. If found loose, please tighten it in time to ensure the safe operation of the equipment. The external and internal parts of the equipment in contact with various chemical media should be frequently treated with anti-corrosion treatment such as rust removal and painting to improve the corrosion resistance of the equipment and extend its service life. Comply with the safe operating procedures and do not overload the equipment. The safety guards of the products are complete and reliable. Unsafe factors are to be eliminated in time. The circuit part should be checked thoroughly and the aging wires should be replaced in time. Adjust the clearance of various parts and replace worn (broken) parts. Avoid contact with corrosive liquids. When not in use, please store the product in a dry place. Do not store the product in hot, humid, or non-ventilated places. Warning Before using the instrument, please read this manual carefully for proper operation. Keep the power cord away from heat, oil and sharp corners, and avoid the power cord from being damaged by stretching, squeezing or twisting. Please don't use it in areas where flammable, explosive or toxic objects are stored. Please don't vacuum up flammable, explosive, hot ashes, burning cigarette butts, etc. Please don't vacuum up corrosive liquids,e.g. bleach, ammonia water, drain cleaner,etc. Please don't vacuum up hard or sharp objects, e.g. broken glass, nails, screws, etc., to avoid damaging the hose. Please avoid malfunctions such as filter blockage and motor burnout caused by inhaling tiny particles such as gypsum powder, wall powder, and cement. If the machine vacuums up the above particles, please clean the filter in time. Please do not use this product without any filter screen, which will damage the motor and shorten the service life of the product. Please do not excessively twist, step on or pull the hose and do not continue to use after the hose of the carbon deposition cleaner is broken. The products and cables shall be placed out of the reach of children. People (including children) who are physically or mentally unsound or have no relevant experience and knowledge must use them under the supervision and guidance of their guardians. If the power cord, plug or other parts are damaged, the use of this product must be stopped to avoid danger.