Battery charger EXPERT CHARGER 10 12/24V 5/10A EXCHARGE10

EXPERT CHARGER 10 features 4 charging modes :  

• STD – liquid acid batteries WET and MF (additional winter mode)
• AGM – batteries AGM, EFB (additional winter mode)
• GEL – gel batteries
• LiFePO4 – lithium iron phosphate batteries (LFP)

The device is additionally adapted for charging motorboat batteries (MARINE type).

Charging Process

7-step charging process ensures optimal charging conditions for the battery. The automatic control system adjusts each of the 7 charging stages for correct battery charging:

• STEP 1 - Diagnostic (Diagnostics) analyses the battery and checks if it can accept charging current; prevents charging of a damaged battery
• STEP 2 - Recovery charge (Pre-charge) – batteries with low voltage are pre-charged with a small current but increased voltage; very discharged batteries can be restored to usability, ensuring longer battery life, this step is skipped if the battery is minimally discharged and in good condition.
• STEP 3 - Soft start (Soft start) – the charger gradually increases the charging current to reach the set charging current
• STEP 4 - Bulk charge – charging with a constant current value to a previously set voltage (14.4÷14.7V)
• STEP 5 - Absorption charge – after reaching the required battery charge level, it switches to constant voltage charging (CV) and the charging process ends
• STEP 6 - Evaluation diagnostic - automatic monitoring of battery voltage after charging is completed
• STEP 7 - Maintenance charge – battery maintenance stage (float) and monitoring its condition; resumes charging with reduced current if necessary.

Physical Specifications

The device is equipped with protection: thermal, against sparking at the terminal clamps, against short circuiting of poles, overload and reverse polarity.

Charging cables are 2m long.

Power Specifications

Single-phase power supply 230V.

Power cables are 1.5m long.

The device is equipped with a power plug.