Putty filler with aluminium aluminium, steel 1,8kg
Index: MF 1245
MULTI FULLER Putty filler with aluminium 1,8kg, intended use: aluminium, steel; colour: Steel-grey, with hardener
Aluminium
Finishing polyester filler with aluminium powder.
Variant
| Colour | Gloss level | Net weight |
|---|---|---|
| Steel grey | matt | 1.8 kg |
Filling of polyester filler with aluminium powder. Particularly intended for the repair of elements exposed to temperature changes. The filler is characterised by increased resistance to mechanical vibrations and good heat dissipation.
Advantages
- Very good adhesion to metals.
- Good thermal conductivity.
- Very good sanding quality.
Substrates
The product is characterised by very good adhesion to various substrates. It can be applied to:
- Steel and aluminium after matting and degreasing.
- Galvanised steel after matting and degreasing.
- Sanded fibreglass (GFK/GRP), polyester fillers, acrylic and epoxy primers, and old coatings in good condition.
- Well-sanded old or factory paint coatings.
Note: Do not apply polyester fillers directly on reactive primers, 1-component acrylic products, and nitrocellulose products.
Important information regarding product use
Degrease
Mixing by weight
100 : 2
Pot life
4 ÷ 7 min. / 20°C
Curing time
20 ÷ 30 min. / 20°C
P80 ÷ P120
P120 ÷ P320
Description
Aluminium
Finishing polyester filler with aluminium powder.
Variant
| Colour | Gloss level | Net weight |
|---|---|---|
| Steel grey | matt | 1.8 kg |
Filling of polyester filler with aluminium powder. Particularly intended for the repair of elements exposed to temperature changes. The filler is characterised by increased resistance to mechanical vibrations and good heat dissipation.
Advantages
- Very good adhesion to metals.
- Good thermal conductivity.
- Very good sanding quality.
Substrates
The product is characterised by very good adhesion to various substrates. It can be applied to:
- Steel and aluminium after matting and degreasing.
- Galvanised steel after matting and degreasing.
- Sanded fibreglass (GFK/GRP), polyester fillers, acrylic and epoxy primers, and old coatings in good condition.
- Well-sanded old or factory paint coatings.
Note: Do not apply polyester fillers directly on reactive primers, 1-component acrylic products, and nitrocellulose products.
Important information regarding product use
Degrease
Mixing by weight
100 : 2
Pot life
4 ÷ 7 min. / 20°C
Curing time
20 ÷ 30 min. / 20°C
P80 ÷ P120
P120 ÷ P320
Technical specification
aluminium
steel
