Induction heater 4,5 kW INDUCTOR DRAGON IHD400
Index: DRAGON 400 IHD04
Induction heater INDUCTOR DRAGON IHD400, voltage: 230V, 3,9 kW / 4,5 kW, type of cooling: liquid coolant
DRAGON 400 is a revolutionary induction heater used for rapid flameless heating of ferrous metals and aluminium using the induction method.
Utilising the principles of electromagnetic induction, it can deliver a huge amount of heat to a specific spot in just a few seconds to a depth of 4mm. By heating only the selected area, it does not damage glass, rubber, plastic components, or painted surfaces in the immediate vicinity of the heater's operation.
The patented tip system allows for quick replacement.
Recommended for every passenger and commercial vehicle service for bodywork and mechanical repairs. For use in repairs and wheel alignment, in tyre replacement points and mechanical workshops. Facilitates the disassembly of blocked screws, nuts, pins, bearings, and other car parts.
Guarantees reduced repair time and maximum heating control during operation. Unlike a gas torch, the induction heater heats metal only in the selected area to a temperature of 500-600˚C without changing the technical characteristics of the steel.
Power adjustable in 10% increments
TECHNICAL DATA:
Current drawn from the network
16A
Power supply network protection
20A slow-blow
Rated supply voltage
230V; 50Hz/60Hz (1ph)
Length of complete cable
3 m
Tank capacity
20 litres
Type of cooling
liquid
Protection degree
IP 21
Weight
63 kg
Overall dimensions L x W x H
43x43x104 cm
Continuous operation time
over 30 minutes at maximum power
Frequency
20-60 kHz automatically adjustable
Maximum power
3.9 kW
Heating power (temperature approx. 1000˚C)
7x12x4mm in 1 second
Peak power
4.5 kW
Adjustment levels
Description
DRAGON 400 is a revolutionary induction heater used for rapid flameless heating of ferrous metals and aluminium using the induction method.
Utilising the principles of electromagnetic induction, it can deliver a huge amount of heat to a specific spot in just a few seconds to a depth of 4mm. By heating only the selected area, it does not damage glass, rubber, plastic components, or painted surfaces in the immediate vicinity of the heater's operation.
The patented tip system allows for quick replacement.
Recommended for every passenger and commercial vehicle service for bodywork and mechanical repairs. For use in repairs and wheel alignment, in tyre replacement points and mechanical workshops. Facilitates the disassembly of blocked screws, nuts, pins, bearings, and other car parts.
Guarantees reduced repair time and maximum heating control during operation. Unlike a gas torch, the induction heater heats metal only in the selected area to a temperature of 500-600˚C without changing the technical characteristics of the steel.
Power adjustable in 10% increments
TECHNICAL DATA:
Current drawn from the network
16A
Power supply network protection
20A slow-blow
Rated supply voltage
230V; 50Hz/60Hz (1ph)
Length of complete cable
3 m
Tank capacity
20 litres
Type of cooling
liquid
Protection degree
IP 21
Weight
63 kg
Overall dimensions L x W x H
43x43x104 cm
Continuous operation time
over 30 minutes at maximum power
Frequency
20-60 kHz automatically adjustable
Maximum power
3.9 kW
Heating power (temperature approx. 1000˚C)
7x12x4mm in 1 second
Peak power
4.5 kW
Adjustment levels
