Induction heater 3,7 kW
Index: DHI44F
Induction heater, voltage: 230V, 13,5 kW / 3,7 kW, type of cooling: liquid coolant
INDUCTOR 3C is a revolutionary induction heater used for rapid flameless heating of ferrous metals and aluminium using the induction method.
Using the principles of electromagnetic induction, it can deliver a huge amount of heat to a specific spot in just a few seconds to a depth of 4mm. By heating only the selected area, it does not damage glass, rubber, plastic parts, or painted surfaces in the immediate vicinity of the heater's operation.
Despite its small size and weight (13.5kg), it achieves high output parameters. The built-in liquid cooling system allows for a power output of 3.7 kW.
Recommended for every passenger and delivery vehicle service for bodywork and mechanical repairs. For use in repairs and wheel alignment, in tyre replacement points and mechanical workshops. It facilitates the disassembly of blocked screws, nuts, pins, bearings, and other car parts.
It guarantees reduced repair time and maximum heating control during operation. Unlike a gas torch, the induction heater heats metal only in the selected area to a temperature of 500-600˚C without changing the technical characteristics of the steel.
Power smoothly adjustable in the range of 10 - 100 %
The device has 2 modes:
- Magnetic field control: Constant magnetic field power mode (CF)
In this mode, the heater delivers a constant magnetic field strength regardless of the surroundings of the heater tip. The heater behaves similarly to a gas torch, where the flame strength is replaced by the magnetic field strength. The strength of the delivered heat is easily controlled by moving the heater tip closer to or further from the heated material, similar to a gas torch.
- Power control: Constant energy delivered to the material mode (CP)
In this mode, the device attempts to deliver and maintain a specific power to the material. The advantage of this mode is the similar heating time of the same detail, which is applicable for repeated heating of the same detail, e.g., in the production process.
The device features a universal remote control system, which allows for easy integration with automated production processes. The device can be controlled via a foot pedal, button, or an analogue signal based on the voltage and current of the coil, providing feedback on output information. In selected models, full control is possible via a Data Bus connection, allowing for full control and complete monitoring of the heating process.
The device provides the ability to intervene in the heating parameter settings and display the most important values of the heating process in Information mode.
Power supply parameters
TECHNICAL DATA
Current drawn from the network
16 A
Rated supply voltage
230 V (180 V–265 V) 50/60 Hz
Power
4.5 kVA
Length of complete cable
2 m
Tank capacity
2.5 l
Type of cooling
liquid
Protection degree
IP22
Weight
13.5 kg
Overall dimensions L x W x H
240x200x440 mm
Frequency
18 – 60 kHz
Maximum power
3.7 kW
Adjustment levels
Description
INDUCTOR 3C is a revolutionary induction heater used for rapid flameless heating of ferrous metals and aluminium using the induction method.
Using the principles of electromagnetic induction, it can deliver a huge amount of heat to a specific spot in just a few seconds to a depth of 4mm. By heating only the selected area, it does not damage glass, rubber, plastic parts, or painted surfaces in the immediate vicinity of the heater's operation.
Despite its small size and weight (13.5kg), it achieves high output parameters. The built-in liquid cooling system allows for a power output of 3.7 kW.
Recommended for every passenger and delivery vehicle service for bodywork and mechanical repairs. For use in repairs and wheel alignment, in tyre replacement points and mechanical workshops. It facilitates the disassembly of blocked screws, nuts, pins, bearings, and other car parts.
It guarantees reduced repair time and maximum heating control during operation. Unlike a gas torch, the induction heater heats metal only in the selected area to a temperature of 500-600˚C without changing the technical characteristics of the steel.
Power smoothly adjustable in the range of 10 - 100 %
The device has 2 modes:
- Magnetic field control: Constant magnetic field power mode (CF)
In this mode, the heater delivers a constant magnetic field strength regardless of the surroundings of the heater tip. The heater behaves similarly to a gas torch, where the flame strength is replaced by the magnetic field strength. The strength of the delivered heat is easily controlled by moving the heater tip closer to or further from the heated material, similar to a gas torch.
- Power control: Constant energy delivered to the material mode (CP)
In this mode, the device attempts to deliver and maintain a specific power to the material. The advantage of this mode is the similar heating time of the same detail, which is applicable for repeated heating of the same detail, e.g., in the production process.
The device features a universal remote control system, which allows for easy integration with automated production processes. The device can be controlled via a foot pedal, button, or an analogue signal based on the voltage and current of the coil, providing feedback on output information. In selected models, full control is possible via a Data Bus connection, allowing for full control and complete monitoring of the heating process.
The device provides the ability to intervene in the heating parameter settings and display the most important values of the heating process in Information mode.
Power supply parameters
TECHNICAL DATA
Current drawn from the network
16 A
Rated supply voltage
230 V (180 V–265 V) 50/60 Hz
Power
4.5 kVA
Length of complete cable
2 m
Tank capacity
2.5 l
Type of cooling
liquid
Protection degree
IP22
Weight
13.5 kg
Overall dimensions L x W x H
240x200x440 mm
Frequency
18 – 60 kHz
Maximum power
3.7 kW
Adjustment levels
