Resin polyester
Index: MF 1045
MULTI FULLER, Resin polyester, capacity 5l, proportions: 100:4, colour transparent, with hardener
Set with structural polyester resin for manual lamination, hardener and glass mat.
Designed for repairing major damage to car bodies, caravans, trailers, and yachts.
Advantages:
- Very good adhesion to metal.
- Good hardness and high flexibility,
- Minimal shrinkage.
- Good sanding properties.
Substrates:
The product has very good adhesion to various substrates.
It can be applied to:
- Steel and aluminium after smoothing and degreasing.
- Galvanised steel after smoothing and degreasing.-
- Sanded fibreglass (GFK/GRP), polyester fillers, acrylic and epoxy primers, and existing coatings in good condition.
Note: Do not apply resin directly to primer fillers, 1K acrylic and nitrocellulose products.
Particularly designed for repairing major damage and corroded body parts.
Mixing ratios by weight:
Resin: 100
Activator: 4
Mix thoroughly.
Gel time:
19-20 minutes at 20°C
Multiple layers can be applied.
Curing time:
35-45 minutes at 20°C
Temperature below 20°C significantly extends the curing time.
Sanding:
Coarse sanding (dry): P80 ÷ P120
Process:
Prepare an appropriate piece of glass mat so that it extends about 2 cm beyond the repaired surface.
Apply the resin mixed with hardener using a brush.
Place the mat, press it down, and saturate with resin using a brush. Multiple layers can be applied.
Wait about 40 minutes. The cured laminate surface should be cleaned mechanically or even with polyester filler.
The minimum application temperature is +10°C.
Note: Do not pour leftover resin mixed with hardener back into the can.
Further work:
Polyester laminates can be directly covered with:
- 2K polyester fillers,
- 2K polyester spray fillers,
- 2K epoxy fillers
- 2K acrylic fillers.
- 2K epoxy fillers.
Rooms should be well ventilated.
When applying 2K products, personal protective equipment should be used. Protect eyes and respiratory system.
Tools should be cleaned immediately after application.
Note: To ensure safety, always follow the instructions provided in the product safety data sheets.
Description
Set with structural polyester resin for manual lamination, hardener and glass mat.
Designed for repairing major damage to car bodies, caravans, trailers, and yachts.
Advantages:
- Very good adhesion to metal.
- Good hardness and high flexibility,
- Minimal shrinkage.
- Good sanding properties.
Substrates:
The product has very good adhesion to various substrates.
It can be applied to:
- Steel and aluminium after smoothing and degreasing.
- Galvanised steel after smoothing and degreasing.-
- Sanded fibreglass (GFK/GRP), polyester fillers, acrylic and epoxy primers, and existing coatings in good condition.
Note: Do not apply resin directly to primer fillers, 1K acrylic and nitrocellulose products.
Particularly designed for repairing major damage and corroded body parts.
Mixing ratios by weight:
Resin: 100
Activator: 4
Mix thoroughly.
Gel time:
19-20 minutes at 20°C
Multiple layers can be applied.
Curing time:
35-45 minutes at 20°C
Temperature below 20°C significantly extends the curing time.
Sanding:
Coarse sanding (dry): P80 ÷ P120
Process:
Prepare an appropriate piece of glass mat so that it extends about 2 cm beyond the repaired surface.
Apply the resin mixed with hardener using a brush.
Place the mat, press it down, and saturate with resin using a brush. Multiple layers can be applied.
Wait about 40 minutes. The cured laminate surface should be cleaned mechanically or even with polyester filler.
The minimum application temperature is +10°C.
Note: Do not pour leftover resin mixed with hardener back into the can.
Further work:
Polyester laminates can be directly covered with:
- 2K polyester fillers,
- 2K polyester spray fillers,
- 2K epoxy fillers
- 2K acrylic fillers.
- 2K epoxy fillers.
Rooms should be well ventilated.
When applying 2K products, personal protective equipment should be used. Protect eyes and respiratory system.
Tools should be cleaned immediately after application.
Note: To ensure safety, always follow the instructions provided in the product safety data sheets.
