Engine oil ceramic additive for vehicle engines, petrol CS-B
Index: CS-B
Engine oil ceramic additive 0,014 kg CS-B for vehicle engines (Petrol), application - advantages: ceramics; decreases friction; improves compression; noise reduction; protection; revitalization, Tube
DESCRIPTION OF OPERATION:
Ceramizer CS-B - a high-quality preparation designed for the protection and revitalisation of petrol engines. The innovative formula of intelligent nano particles with high surface activity penetrates the metal structure, creating a durable stable protective coating (ceramic-metal) with a low coefficient of friction and excellent thermal conductivity properties. This allows for significant friction reduction and constant protection of components, practically eliminating their wear process. Regular use can significantly extend the engine's lifespan. Provides protection for 100,000 KM.
BENEFITS:
Regenerates and protects the engine and its mechanisms from wear Creates a durable protective layer with very low friction coefficients and high resistance Facilitates starting and protects against the phenomenon of so-called DRY START Improves compression pressure in cylinders. Reduces oil consumption Balances and quiets engine operation Reduces the risk of failure Reduces fuel consumption Increases power, torque, efficiency, and engine dynamics
IMPORTANT:
To achieve the best application effect, follow the instructions strictly. The application dose of Ceramizer should be selected based on the "NUMBER OF PREPARATION DOSAGES" table. A lower dose of the preparation than provided in the table may not bring the expected revitalisation results. Ceramizer is intended for all types of engine oils. It can be used in mineral, semi-synthetic, and fully synthetic engine oils. It can be used in both new and older vehicles with a mileage of over 1000 km. Using Ceramizer does not void the vehicle manufacturer's warranty. To keep the engine in good condition, remember to use Ceramizer regularly according to recommendations every 100,000 km.
HOW TO USE THE CERAMIZER PREPARATION:
- Start and warm up the engine to an operating temperature of 80-90%, to achieve this, drive a short distance of 2-5 km or leave the engine running at idle for 15 minutes.
- Turn off the engine.
- Add the appropriate amount of Ceramizer by applying it to the engine oil filler.
- Start the engine and leave it at idle for 15 minutes.
- Drive gently for 200 km without exceeding 3000 rpm. This can be done during normal vehicle operation. The required 200 km interval can be covered in one go (recommended) or in several stages.
- After gently driving 200 km, normal vehicle operation can begin without restrictions on engine speed.
- The full process of revitalisation and mechanical regeneration will occur after driving 1500 km.
- Remember not to change the engine oil during this time.
Description
DESCRIPTION OF OPERATION:
Ceramizer CS-B - a high-quality preparation designed for the protection and revitalisation of petrol engines. The innovative formula of intelligent nano particles with high surface activity penetrates the metal structure, creating a durable stable protective coating (ceramic-metal) with a low coefficient of friction and excellent thermal conductivity properties. This allows for significant friction reduction and constant protection of components, practically eliminating their wear process. Regular use can significantly extend the engine's lifespan. Provides protection for 100,000 KM.
BENEFITS:
Regenerates and protects the engine and its mechanisms from wear Creates a durable protective layer with very low friction coefficients and high resistance Facilitates starting and protects against the phenomenon of so-called DRY START Improves compression pressure in cylinders. Reduces oil consumption Balances and quiets engine operation Reduces the risk of failure Reduces fuel consumption Increases power, torque, efficiency, and engine dynamics
IMPORTANT:
To achieve the best application effect, follow the instructions strictly. The application dose of Ceramizer should be selected based on the "NUMBER OF PREPARATION DOSAGES" table. A lower dose of the preparation than provided in the table may not bring the expected revitalisation results. Ceramizer is intended for all types of engine oils. It can be used in mineral, semi-synthetic, and fully synthetic engine oils. It can be used in both new and older vehicles with a mileage of over 1000 km. Using Ceramizer does not void the vehicle manufacturer's warranty. To keep the engine in good condition, remember to use Ceramizer regularly according to recommendations every 100,000 km.
HOW TO USE THE CERAMIZER PREPARATION:
- Start and warm up the engine to an operating temperature of 80-90%, to achieve this, drive a short distance of 2-5 km or leave the engine running at idle for 15 minutes.
- Turn off the engine.
- Add the appropriate amount of Ceramizer by applying it to the engine oil filler.
- Start the engine and leave it at idle for 15 minutes.
- Drive gently for 200 km without exceeding 3000 rpm. This can be done during normal vehicle operation. The required 200 km interval can be covered in one go (recommended) or in several stages.
- After gently driving 200 km, normal vehicle operation can begin without restrictions on engine speed.
- The full process of revitalisation and mechanical regeneration will occur after driving 1500 km.
- Remember not to change the engine oil during this time.
Technical specification
for conservation
for prevention
for protecting
for protectionceramics
decreases friction
improves compression
noise reduction
protection
revitalization