Device for calibrating cameras and radar 8PZ 015 270-251
Index: 8PZ 015 270-251
ADAS device CSC-Tool, for callibration: cameras, radars, wheel clamps, set
HELLA GUTMANN CSC-Tool SE Set
Precision in calibrating driver assistance systems (ADAS).
The Key to Precision: Why is ADAS Calibration Essential?
Modern cars use many driver assistance systems (ADAS). Typical ADAS functions include adaptive cruise control, lane assist, and emergency braking. These systems rely on sensors: ultrasonic, video cameras, lidar, and radar. All these sensors form a complete ADAS system.
The central control unit collects signals to create a complete picture of the vehicle's surroundings. If the driver does not respond to a threat, the controller can initiate emergency braking. Correct operation of the assistants requires calibration of the ADAS sensors. This is essential after service work or repairs.
Components and Functionality of the Set
The offered set allows for the calibration of camera and radar-based systems.
CSC-Tool SE (Prod. No. 8PD 015 269-101)
This is the main base for calibrating the front camera and sensors. The Second Edition (SE) version introduces improvements that facilitate operation, save time, and expand the range of applications. The tool is prepared for connection to an analogue wheel alignment system and offers axle measurement.
- Full configuration freedom – adapting functions and data to the workshop's needs
- Operation via any display device (tablet, laptop, PC) – no built-in screen
MAIN ADVANTAGES
- Spring-assisted height adjustment of the adjustment rod is possible by one person
- Adjustability for different camera and radar systems
- Recessed main bracket for very low angle adjustment plate setting
- Modularity and the possibility of expansion at any time
- Adjustment/calibration documentation in print and in Car History
- High accuracy of measurement
- Compatibility with diagnostic testers from the mega macs family
BASIC DELIVERY SCOPE
- Main bracket including adjustment rod
- VAG calibration board
- Measuring tape (2000 mm)
- Assembly kit
Wheel Holder SE (Prod. No. 8PZ 015 269-131)
SE holders are a prerequisite for correct calibration. They allow for central and parallel positioning of the CSC-Tool SE in front of the vehicle.
- Quick positioning of the CSC-Tool in front of the vehicle
- The green line laser helps centre and align the tool parallel to the rear axle.
Radar Kit I EVO (Prod. No. 8PZ 010 611-981)
Allows for the adjustment of radar sensors at almost any height. Provides flexibility to all variants of the CSC-Tool. The system holder is the basis for future ADAS hardware extensions.
- Vertical, stepless movement of the angle adjustment plate
- Use with all variants of the CSC-Tool
- The system holder forms the basis for future hardware extensions in the ADAS range
- Adjustment of the angle of inclination of the angle adjustment plate using the cross holder
The delivery scope of the Radar Kit I EVO includes: system holder and EVO angle adjustment plate.
Measuring Tape Set with Holder (Prod. No. 8PZ 010 611-211)
The tapes are used for independent and easy setting of the CSC-Tool/SE distance to the vehicle. The tape has magnets, which makes it easy to attach to the wheel holder.
Camera Calibration Boards
Appropriate boards are needed for camera system calibration. The set includes the following interchangeable boards for front camera calibration:
- VAG Board 1-01 (Included in the basic delivery scope of the CSC-Tool SE)
- Mercedes-Benz 1-02 (8PZ 010 601-901)
- Renault 1-03 (8PZ 010 607-951)
- Nissan | Mercedes-Benz 1-04 (8PZ 010 607-961)
- KIA | Hyundai | Opel | Peugeot | Citroën | DS Automobiles | Fiat | Jeep 1-05 (8PZ 010 607-971)
Description
HELLA GUTMANN CSC-Tool SE Set
Precision in calibrating driver assistance systems (ADAS).
The Key to Precision: Why is ADAS Calibration Essential?
Modern cars use many driver assistance systems (ADAS). Typical ADAS functions include adaptive cruise control, lane assist, and emergency braking. These systems rely on sensors: ultrasonic, video cameras, lidar, and radar. All these sensors form a complete ADAS system.
The central control unit collects signals to create a complete picture of the vehicle's surroundings. If the driver does not respond to a threat, the controller can initiate emergency braking. Correct operation of the assistants requires calibration of the ADAS sensors. This is essential after service work or repairs.
Components and Functionality of the Set
The offered set allows for the calibration of camera and radar-based systems.
CSC-Tool SE (Prod. No. 8PD 015 269-101)
This is the main base for calibrating the front camera and sensors. The Second Edition (SE) version introduces improvements that facilitate operation, save time, and expand the range of applications. The tool is prepared for connection to an analogue wheel alignment system and offers axle measurement.
- Full configuration freedom – adapting functions and data to the workshop's needs
- Operation via any display device (tablet, laptop, PC) – no built-in screen
MAIN ADVANTAGES
- Spring-assisted height adjustment of the adjustment rod is possible by one person
- Adjustability for different camera and radar systems
- Recessed main bracket for very low angle adjustment plate setting
- Modularity and the possibility of expansion at any time
- Adjustment/calibration documentation in print and in Car History
- High accuracy of measurement
- Compatibility with diagnostic testers from the mega macs family
BASIC DELIVERY SCOPE
- Main bracket including adjustment rod
- VAG calibration board
- Measuring tape (2000 mm)
- Assembly kit
Wheel Holder SE (Prod. No. 8PZ 015 269-131)
SE holders are a prerequisite for correct calibration. They allow for central and parallel positioning of the CSC-Tool SE in front of the vehicle.
- Quick positioning of the CSC-Tool in front of the vehicle
- The green line laser helps centre and align the tool parallel to the rear axle.
Radar Kit I EVO (Prod. No. 8PZ 010 611-981)
Allows for the adjustment of radar sensors at almost any height. Provides flexibility to all variants of the CSC-Tool. The system holder is the basis for future ADAS hardware extensions.
- Vertical, stepless movement of the angle adjustment plate
- Use with all variants of the CSC-Tool
- The system holder forms the basis for future hardware extensions in the ADAS range
- Adjustment of the angle of inclination of the angle adjustment plate using the cross holder
The delivery scope of the Radar Kit I EVO includes: system holder and EVO angle adjustment plate.
Measuring Tape Set with Holder (Prod. No. 8PZ 010 611-211)
The tapes are used for independent and easy setting of the CSC-Tool/SE distance to the vehicle. The tape has magnets, which makes it easy to attach to the wheel holder.
Camera Calibration Boards
Appropriate boards are needed for camera system calibration. The set includes the following interchangeable boards for front camera calibration:
- VAG Board 1-01 (Included in the basic delivery scope of the CSC-Tool SE)
- Mercedes-Benz 1-02 (8PZ 010 601-901)
- Renault 1-03 (8PZ 010 607-951)
- Nissan | Mercedes-Benz 1-04 (8PZ 010 607-961)
- KIA | Hyundai | Opel | Peugeot | Citroën | DS Automobiles | Fiat | Jeep 1-05 (8PZ 010 607-971)
Technical specification
cameras
radarsReplacements
Device for calibrating cameras and radar 0 684 300 1090 684 300 109See details- Device for calibrating cameras and radar 0 684 300 109 DEMO0 684 300 109 DEMOSee details
Device for calibrating cameras and radar 8PD 015 269-1018PD 015 269-101See details
Device for calibrating cameras and radar 8PD 015 270-3118PD 015 270-311See details
Device for calibrating cameras and radar EESEEU505BKOS EESEEU505B/DSee details
Device for calibrating cameras and radar TEX CCS2 SET1TEX CCS2 SET1See details
Device for calibrating cameras and radar TEX S1261KTEX S1261KSee details
Device for calibrating cameras and radar X-431 ADASX-431 ADASSee details
Device for calibrating cameras and radar X-431 ADAS PRO+ V2X-431 ADAS PRO+ V2See details